Full Update JYERSUI with latest Marlin bugfix_2.1.x

[LCh-77]

This pull request modernizes JYERSUI while respecting the authorship, philosophy and code of Jacob. Some modules were modded by me to be used in the UI, proper authorship is cited. You are totally free to use.

• PID plot
• Gcode preview
• Host Action Menu
• Colorize UI
• Junction Deviation
• LED lights control
• Shows boot screen when reset the printer
• Firmware retracts menu
• Off line, on click and live Z-Offset
• Mesh leveling active indicator
• Selectable 115200/250000 baud rate
• Live brightness change
• Support for M75 Filename to print
• Probe settings menu
• Endstop diagnostic
• Screen lock

[LCh-77]

Thanks for this! Would you be able to provide builds?

Maybe but only for Ender3V2 4.2.2

[ThomDietrich]

Would be fine with me, but maybe you could give a few hints regarding relevant settings and compilation!? Thanks!!

[LCh-77]

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA
Also now the Enhanced branch comes with working configuration files.

[MiketheMaker18]

Going to give this a test shortly. Using E3V2

[EntasDisk]

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

[LCh-77]

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

Fixed in the release, thanks.

[MiketheMaker18]

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

Fixed in the release, thanks.

I also had the issue. I went through about every menu and it seems to be working really well. Thank you!

[LCh-77]

You are welcome.

[elusivestudio]

Is there a way to revert Default (brown) menu color to the color code of creality?

[rhawley88]

@LCh-77 what's the difference between the 422 and 427? I tried the 427 and installed fine on ender 3v2 but was unable to home or move (x,y). I then replaced it with 422 and that seems to work fine.

[rhawley88]

Never mind been so long since iv flashed forgot its the main board

[ThomDietrich]

Hey guys,
I didn't get around to perform the update yet. Did anyone by any chance compare this release to this other project? https://github.com/mriscoc/Ender3V2S1/wiki

Anything unique in this PR here?