From 496e2f2d3684b8cbe59f5f2768952f6f386580bb Mon Sep 17 00:00:00 2001
From: Zach Whitehead <zjwhitehead@users.noreply.github.com>
Date: Thu, 2 Apr 2026 16:49:09 -0500
Subject: [PATCH 1/6] Add BLE reconnect window and status icon control

Introduce a 5-minute reconnect window and UI status control for BLE advertising/connection handling. Adds reconnect window timer/flag and init logic so whitelist advertising after boot or disconnect only runs while the reconnect window is active; advertising logic now checks reconnectWindowActive instead of relying solely on bond count. Add updateBLEStatusIcon(), showBLEStatusIcon(), and hideBLEStatusIcon() and wire status updates across BLE lifecycle events; LVGL changes centralize pairing/status icon show/hide and make stopBLEPairingIconFlash delegate to hideBLEStatusIcon. Remove some legacy scan-response manufacturer payload code paths and stop triggering the pairing-icon flash from the main button handler. Also comment out the BLE_PAIR_ON_BOOT build flag in platformio.ini.
---
 inc/sp140/lvgl/lvgl_updates.h   |   2 +
 platformio.ini                  |   2 +-
 src/sp140/ble/ble_core.cpp      | 115 ++++++++++++++++++++++++--------
 src/sp140/lvgl/lvgl_updates.cpp |  20 +++++-
 src/sp140/main.cpp              |   1 -
 5 files changed, 111 insertions(+), 29 deletions(-)

diff --git a/inc/sp140/lvgl/lvgl_updates.h b/inc/sp140/lvgl/lvgl_updates.h
index 30ee0f7c..89ac66ee 100644
--- a/inc/sp140/lvgl/lvgl_updates.h
+++ b/inc/sp140/lvgl/lvgl_updates.h
@@ -79,5 +79,7 @@ void stopCriticalBorderFlashDirect();
 // BLE pairing icon flash functions
 void startBLEPairingIconFlash();
 void stopBLEPairingIconFlash();
+void showBLEStatusIcon();
+void hideBLEStatusIcon();
 
 #endif  // INC_SP140_LVGL_LVGL_UPDATES_H_
diff --git a/platformio.ini b/platformio.ini
index 32a447d7..00f46887 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -42,7 +42,7 @@ build_flags =
 	-D CORE_DEBUG_LEVEL=2
 	-D CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
 	-Wno-error=format
-	-D BLE_PAIR_ON_BOOT
+	;-D BLE_PAIR_ON_BOOT
 build_type = debug
 debug_speed = 12000
 debug_tool = esp-builtin
diff --git a/src/sp140/ble/ble_core.cpp b/src/sp140/ble/ble_core.cpp
index aa962e37..90b8d5fb 100644
--- a/src/sp140/ble/ble_core.cpp
+++ b/src/sp140/ble/ble_core.cpp
@@ -22,19 +22,23 @@ namespace {
 constexpr size_t kAdvertisingNameCapacity = 32;
 constexpr TickType_t kConnTuneDelayTicks = pdMS_TO_TICKS(1200);
 constexpr TickType_t kPairingTimeoutTicks = pdMS_TO_TICKS(60000);
+constexpr TickType_t kReconnectWindowTicks = pdMS_TO_TICKS(300000);  // 5 min
 constexpr TickType_t kAdvertisingWatchdogTicks = pdMS_TO_TICKS(1000);
 TimerHandle_t gConnTuneTimer = nullptr;
 TimerHandle_t gPairingTimer = nullptr;
+TimerHandle_t gReconnectWindowTimer = nullptr;
 TimerHandle_t gAdvertisingWatchdogTimer = nullptr;
 char gAdvertisingName[kAdvertisingNameCapacity];
 bool pairingModeActive = false;
 bool pairingModeTransitionActive = false;
+bool reconnectWindowActive = false;
 
 // Store the active connection handle for conn param updates
 uint16_t activeConnHandle = 0;
 
 bool shouldAdvertiseWhilePowered();
 bool startAdvertising(NimBLEServer *server);
+void updateBLEStatusIcon();
 
 // Builds gAdvertisingName from the BT MAC and returns the full MAC address
 // as an uppercase string for use as a unique device ID. Must be called before
@@ -63,6 +67,41 @@ void stopPairingModeTimer() {
   }
 }
 
+void stopReconnectWindowTimer() {
+  if (gReconnectWindowTimer != nullptr) {
+    xTimerStop(gReconnectWindowTimer, 0);
+  }
+}
+
+void onReconnectWindowTimeout(TimerHandle_t timer) {
+  (void)timer;
+  reconnectWindowActive = false;
+  USBSerial.println("[BLE] Reconnect window expired; stopping advertising");
+  restartBLEAdvertising();
+}
+
+void startReconnectWindowTimer() {
+  reconnectWindowActive = true;
+  if (gReconnectWindowTimer == nullptr) {
+    gReconnectWindowTimer = xTimerCreate("bleReconn", kReconnectWindowTicks,
+                                         pdFALSE, nullptr,
+                                         onReconnectWindowTimeout);
+  }
+  if (gReconnectWindowTimer != nullptr) {
+    xTimerStop(gReconnectWindowTimer, 0);
+    xTimerStart(gReconnectWindowTimer, 0);
+  }
+}
+
+void initReconnectWindowFromBoot() {
+  if (NimBLEDevice::getNumBonds() > 0) {
+    startReconnectWindowTimer();
+    USBSerial.println("[BLE] Reconnect window active (5 min)");
+  } else {
+    reconnectWindowActive = false;
+  }
+}
+
 size_t syncWhiteListFromBonds() {
   // Reconcile the whitelist to the current bond store. Advertising must be
   // stopped before calling this — the BLE controller rejects whitelist changes
@@ -89,7 +128,6 @@ size_t syncWhiteListFromBonds() {
 void onPairingTimeout(TimerHandle_t timer) {
   (void)timer;
   pairingModeActive = false;
-  stopBLEPairingIconFlash();
   USBSerial.println("[BLE] Pairing mode expired, re-enabling whitelist");
   restartBLEAdvertising();
 }
@@ -112,11 +150,25 @@ void applyPreferredLinkParams(TimerHandle_t timer) {
 
 bool shouldAdvertiseWhilePowered() {
   return !pairingModeTransitionActive &&
-         (pairingModeActive || NimBLEDevice::getNumBonds() > 0);
+         (pairingModeActive || reconnectWindowActive);
+}
+
+void updateBLEStatusIcon() {
+  if (deviceConnected) {
+    showBLEStatusIcon();
+    return;
+  }
+
+  if (pairingModeActive) {
+    startBLEPairingIconFlash();
+  } else {
+    hideBLEStatusIcon();
+  }
 }
 
 bool startAdvertising(NimBLEServer *server) {
   if (server == nullptr || pairingModeTransitionActive) {
+    updateBLEStatusIcon();
     return false;
   }
 
@@ -133,6 +185,14 @@ bool startAdvertising(NimBLEServer *server) {
   if (!allowOpenAdvertising && bondCount == 0) {
     USBSerial.println(
         "[BLE] No bonds present and pairing mode inactive; advertising stopped");
+    updateBLEStatusIcon();
+    return false;
+  }
+
+  if (!allowOpenAdvertising && bondCount > 0 && !reconnectWindowActive) {
+    USBSerial.println(
+        "[BLE] Reconnect window inactive; whitelist advertising not started");
+    updateBLEStatusIcon();
     return false;
   }
 
@@ -161,28 +221,16 @@ bool startAdvertising(NimBLEServer *server) {
   // Flutter app's `startScan()` filters for CONFIG_SERVICE_UUID.
   adv.addServiceUUID(NimBLEUUID(CONFIG_SERVICE_UUID));
 
-  // Scan response: manufacturer data with pairing-mode flag so the Flutter app
-  // can hide non-pairable controllers from the connect list.
-  // Format: Espressif company ID (0x02E5 LE) + 1 flag byte.
-  NimBLEExtAdvertisement scanRsp(BLE_HCI_LE_PHY_1M, BLE_HCI_LE_PHY_1M);
-  scanRsp.setLegacyAdvertising(true);
-  scanRsp.setScannable(true);
-  const uint8_t mfrData[] = {0xE5, 0x02,
-                             static_cast<uint8_t>(allowOpenAdvertising ? 0x01 : 0x00)};
-  scanRsp.setManufacturerData(mfrData, sizeof(mfrData));
-
   advertising->removeAll();
   const bool configured = advertising->setInstanceData(kExtAdvInstance, adv);
-  const bool scanRspConfigured =
-      configured ? advertising->setScanResponseData(kExtAdvInstance, scanRsp)
-                 : false;
   const bool started =
-      configured && scanRspConfigured && advertising->start(kExtAdvInstance);
+      configured && advertising->start(kExtAdvInstance);
   USBSerial.printf(
-      "[BLE] Ext adv cfg=%d scanRsp=%d start=%d mode=%s bonds=%u wl=%u\n",
-      configured, scanRspConfigured, started,
+      "[BLE] Ext adv cfg=%d start=%d mode=%s bonds=%u wl=%u\n",
+      configured, started,
       allowOpenAdvertising ? "OPEN" : "BONDED",
       static_cast<unsigned>(bondCount), static_cast<unsigned>(whiteListCount));
+  updateBLEStatusIcon();
   return started;
 #else
   // Configure payload once — NimBLE accumulates addServiceUUID calls
@@ -206,18 +254,13 @@ bool startAdvertising(NimBLEServer *server) {
     advertising->setScanFilter(false, true);
   }
 
-  // Manufacturer data with pairing-mode flag (updated every restart).
-  // Espressif company ID (0x02E5 LE) + 1 flag byte.
-  const std::string mfrPayload = {'\xE5', '\x02',
-                                  static_cast<char>(allowOpenAdvertising ? 0x01 : 0x00)};
-  advertising->setManufacturerData(mfrPayload);
-
   const bool started = advertising->start();
   USBSerial.printf("[BLE] Legacy adv start=%s mode=%s bonds=%u whitelist=%u\n",
                    started ? "OK" : "FAIL",
                    allowOpenAdvertising ? "OPEN" : "BONDED",
                    static_cast<unsigned>(bondCount),
                    static_cast<unsigned>(whiteListCount));
+  updateBLEStatusIcon();
   return started;
 #endif
 }
@@ -249,6 +292,9 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
     deviceConnected = true;
     connectedHandle = connInfo.getConnHandle();
 
+    stopReconnectWindowTimer();
+    reconnectWindowActive = false;
+
     if (gConnTuneTimer != nullptr) {
       xTimerStop(gConnTuneTimer, 0);
       xTimerStart(gConnTuneTimer, 0);
@@ -258,6 +304,7 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
         connectedHandle, connInfo.getAddress().toString().c_str(),
         connInfo.isBonded() ? 1 : 0, connInfo.isEncrypted() ? 1 : 0,
         pairingModeActive ? 1 : 0);
+    updateBLEStatusIcon();
 
     // During pairing mode, proactively request fresh security negotiation.
     // This helps recover from stale iOS bonds where iOS tries to restore
@@ -287,8 +334,15 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
     // Suppress the immediate advertising restart during a pairing transition —
     // enterBLEPairingMode() issues its own startAdvertising after clearing bonds.
     if (!pairingModeTransitionActive) {
+      if (NimBLEDevice::getNumBonds() > 0) {
+        startReconnectWindowTimer();
+      } else {
+        reconnectWindowActive = false;
+        stopReconnectWindowTimer();
+      }
       startAdvertising(server);
     }
+    updateBLEStatusIcon();
   }
 
   void onAuthenticationComplete(NimBLEConnInfo &connInfo) override {
@@ -298,7 +352,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
       if (pairingModeActive) {
         pairingModeActive = false;
         stopPairingModeTimer();
-        stopBLEPairingIconFlash();
       }
     }
 
@@ -327,6 +380,7 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
         }
       }
     }
+    updateBLEStatusIcon();
   }
 
   void onIdentity(NimBLEConnInfo &connInfo) override {
@@ -388,8 +442,14 @@ void setupBLE() {
 #ifdef BLE_PAIR_ON_BOOT
   USBSerial.println("[BLE] BLE_PAIR_ON_BOOT: entering pairing mode automatically");
   enterBLEPairingMode();
-  startBLEPairingIconFlash();
 #endif
+  // After optional boot pairing: start reconnect window only if bonds remain.
+  initReconnectWindowFromBoot();
+  if (shouldAdvertiseWhilePowered()) {
+    restartBLEAdvertising();
+  } else {
+    updateBLEStatusIcon();
+  }
 }
 
 void requestFastConnParams() {
@@ -410,6 +470,7 @@ void requestNormalConnParams() {
 
 void restartBLEAdvertising() {
   if (pServer == nullptr) {
+    updateBLEStatusIcon();
     return;
   }
 
@@ -419,6 +480,8 @@ void restartBLEAdvertising() {
 void enterBLEPairingMode() {
   // Block advertising restarts (e.g. from onDisconnect) during this transition.
   pairingModeTransitionActive = true;
+  stopReconnectWindowTimer();
+  reconnectWindowActive = false;
 
   // Single-bond model: disconnect the current peer so we can safely clear bonds.
   if (deviceConnected && pServer != nullptr &&
diff --git a/src/sp140/lvgl/lvgl_updates.cpp b/src/sp140/lvgl/lvgl_updates.cpp
index af78e915..b5963388 100644
--- a/src/sp140/lvgl/lvgl_updates.cpp
+++ b/src/sp140/lvgl/lvgl_updates.cpp
@@ -308,7 +308,21 @@ void startBLEPairingIconFlash() {
   }
 }
 
-void stopBLEPairingIconFlash() {
+void showBLEStatusIcon() {
+  if (xSemaphoreTake(lvglMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
+    if (ble_pairing_flash_timer != NULL) {
+      lv_timer_del(ble_pairing_flash_timer);
+      ble_pairing_flash_timer = NULL;
+    }
+    if (ble_pairing_icon != NULL) {
+      lv_obj_remove_flag(ble_pairing_icon, LV_OBJ_FLAG_HIDDEN);
+    }
+    isFlashingBLEPairingIcon = false;
+    xSemaphoreGive(lvglMutex);
+  }
+}
+
+void hideBLEStatusIcon() {
   if (xSemaphoreTake(lvglMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
     if (ble_pairing_flash_timer != NULL) {
       lv_timer_del(ble_pairing_flash_timer);
@@ -322,6 +336,10 @@ void stopBLEPairingIconFlash() {
   }
 }
 
+void stopBLEPairingIconFlash() {
+  hideBLEStatusIcon();
+}
+
 // Update the climb rate indicator
 void updateClimbRateIndicator(float climbRate) {
   // Clamp climb rate to displayable range (-0.6 to +0.6 m/s)
diff --git a/src/sp140/main.cpp b/src/sp140/main.cpp
index f94f33fb..41d762f4 100644
--- a/src/sp140/main.cpp
+++ b/src/sp140/main.cpp
@@ -932,7 +932,6 @@ void buttonHandlerTask(void *parameter) {
             currentHoldTime >= BLE_PAIRING_HOLD_MS && !pairingHoldHandled) {
           enterBLEPairingMode();
           pulseVibeMotor();
-          startBLEPairingIconFlash();
           USBSerial.println("[BLE] Pairing mode activated via button hold");
           pairingHoldHandled = true;
         }

From 2b32b798911d7dba82f08caf1af3f02cbfcf1554 Mon Sep 17 00:00:00 2001
From: Zach Whitehead <zjwhitehead@users.noreply.github.com>
Date: Thu, 2 Apr 2026 17:06:46 -0500
Subject: [PATCH 2/6] Decouple BLE UI updates; expose pairing state

Remove direct UI calls from BLE core and move BLE pairing icon management into the LVGL UI task. Added isBLEPairingModeActive() to ble_core.h/.cpp so the UI can query pairing state, removed updateBLEStatusIcon() and its calls from ble_core.cpp to decouple BLE logic from display code, and updated lvgl_updates.cpp to include BLE headers and keep the pairing icon in sync (managing the flash timer and visibility). This reduces cross-module coupling and ensures missed callback updates are recovered by the UI task.
---
 inc/sp140/ble/ble_core.h        |  1 +
 src/sp140/ble/ble_core.cpp      | 28 ++--------------------------
 src/sp140/lvgl/lvgl_updates.cpp | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 35 insertions(+), 26 deletions(-)

diff --git a/inc/sp140/ble/ble_core.h b/inc/sp140/ble/ble_core.h
index bd1d2cdb..124f363f 100644
--- a/inc/sp140/ble/ble_core.h
+++ b/inc/sp140/ble/ble_core.h
@@ -17,5 +17,6 @@ void requestNormalConnParams();
 // Temporarily disable whitelist filtering so a new device can bond.
 // Advertising reopens for ~60 seconds then whitelisting is restored.
 void enterBLEPairingMode();
+bool isBLEPairingModeActive();
 
 #endif  // INC_SP140_BLE_BLE_CORE_H_
diff --git a/src/sp140/ble/ble_core.cpp b/src/sp140/ble/ble_core.cpp
index 90b8d5fb..75d5f5fc 100644
--- a/src/sp140/ble/ble_core.cpp
+++ b/src/sp140/ble/ble_core.cpp
@@ -8,7 +8,6 @@
 #include <freertos/timers.h>
 
 #include "sp140/ble.h"
-#include "sp140/lvgl/lvgl_updates.h"
 #include "sp140/ble/ble_ids.h"
 #include "sp140/ble/config_service.h"
 #include "sp140/ble/fastlink_service.h"
@@ -38,7 +37,6 @@ uint16_t activeConnHandle = 0;
 
 bool shouldAdvertiseWhilePowered();
 bool startAdvertising(NimBLEServer *server);
-void updateBLEStatusIcon();
 
 // Builds gAdvertisingName from the BT MAC and returns the full MAC address
 // as an uppercase string for use as a unique device ID. Must be called before
@@ -153,22 +151,8 @@ bool shouldAdvertiseWhilePowered() {
          (pairingModeActive || reconnectWindowActive);
 }
 
-void updateBLEStatusIcon() {
-  if (deviceConnected) {
-    showBLEStatusIcon();
-    return;
-  }
-
-  if (pairingModeActive) {
-    startBLEPairingIconFlash();
-  } else {
-    hideBLEStatusIcon();
-  }
-}
-
 bool startAdvertising(NimBLEServer *server) {
   if (server == nullptr || pairingModeTransitionActive) {
-    updateBLEStatusIcon();
     return false;
   }
 
@@ -185,14 +169,12 @@ bool startAdvertising(NimBLEServer *server) {
   if (!allowOpenAdvertising && bondCount == 0) {
     USBSerial.println(
         "[BLE] No bonds present and pairing mode inactive; advertising stopped");
-    updateBLEStatusIcon();
     return false;
   }
 
   if (!allowOpenAdvertising && bondCount > 0 && !reconnectWindowActive) {
     USBSerial.println(
         "[BLE] Reconnect window inactive; whitelist advertising not started");
-    updateBLEStatusIcon();
     return false;
   }
 
@@ -230,7 +212,6 @@ bool startAdvertising(NimBLEServer *server) {
       configured, started,
       allowOpenAdvertising ? "OPEN" : "BONDED",
       static_cast<unsigned>(bondCount), static_cast<unsigned>(whiteListCount));
-  updateBLEStatusIcon();
   return started;
 #else
   // Configure payload once — NimBLE accumulates addServiceUUID calls
@@ -260,7 +241,6 @@ bool startAdvertising(NimBLEServer *server) {
                    allowOpenAdvertising ? "OPEN" : "BONDED",
                    static_cast<unsigned>(bondCount),
                    static_cast<unsigned>(whiteListCount));
-  updateBLEStatusIcon();
   return started;
 #endif
 }
@@ -304,7 +284,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
         connectedHandle, connInfo.getAddress().toString().c_str(),
         connInfo.isBonded() ? 1 : 0, connInfo.isEncrypted() ? 1 : 0,
         pairingModeActive ? 1 : 0);
-    updateBLEStatusIcon();
 
     // During pairing mode, proactively request fresh security negotiation.
     // This helps recover from stale iOS bonds where iOS tries to restore
@@ -342,7 +321,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
       }
       startAdvertising(server);
     }
-    updateBLEStatusIcon();
   }
 
   void onAuthenticationComplete(NimBLEConnInfo &connInfo) override {
@@ -380,7 +358,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
         }
       }
     }
-    updateBLEStatusIcon();
   }
 
   void onIdentity(NimBLEConnInfo &connInfo) override {
@@ -447,8 +424,6 @@ void setupBLE() {
   initReconnectWindowFromBoot();
   if (shouldAdvertiseWhilePowered()) {
     restartBLEAdvertising();
-  } else {
-    updateBLEStatusIcon();
   }
 }
 
@@ -470,7 +445,6 @@ void requestNormalConnParams() {
 
 void restartBLEAdvertising() {
   if (pServer == nullptr) {
-    updateBLEStatusIcon();
     return;
   }
 
@@ -531,3 +505,5 @@ void enterBLEPairingMode() {
   USBSerial.println("[BLE] Pairing mode active for 60s");
   restartBLEAdvertising();
 }
+
+bool isBLEPairingModeActive() { return pairingModeActive; }
diff --git a/src/sp140/lvgl/lvgl_updates.cpp b/src/sp140/lvgl/lvgl_updates.cpp
index b5963388..a5ebb199 100644
--- a/src/sp140/lvgl/lvgl_updates.cpp
+++ b/src/sp140/lvgl/lvgl_updates.cpp
@@ -4,6 +4,8 @@
 #include "../../../inc/sp140/globals.h"
 #include "../../../inc/sp140/vibration_pwm.h"
 #include "../../../inc/sp140/shared-config.h"
+#include "../../../inc/sp140/ble.h"
+#include "../../../inc/sp140/ble/ble_core.h"
 #include <math.h>
 
 // Flash timer globals - definitions
@@ -851,6 +853,36 @@ void updateLvglMainScreen(
     lv_obj_set_style_image_recolor(arm_fail_warning_icon_img, original_arm_fail_icon_color, LV_PART_MAIN);
   }
 
+  // Keep the BLE icon synced from the UI task so missed callback updates recover.
+  if (ble_pairing_icon != NULL) {
+    if (deviceConnected) {
+      if (ble_pairing_flash_timer != NULL) {
+        lv_timer_del(ble_pairing_flash_timer);
+        ble_pairing_flash_timer = NULL;
+      }
+      lv_obj_remove_flag(ble_pairing_icon, LV_OBJ_FLAG_HIDDEN);
+      isFlashingBLEPairingIcon = false;
+    } else if (isBLEPairingModeActive()) {
+      if (!isFlashingBLEPairingIcon) {
+        isFlashingBLEPairingIcon = true;
+        lv_obj_remove_flag(ble_pairing_icon, LV_OBJ_FLAG_HIDDEN);
+        ble_pairing_flash_timer = lv_timer_create(ble_pairing_flash_timer_cb, 500, NULL);
+        if (ble_pairing_flash_timer == NULL) {
+          isFlashingBLEPairingIcon = false;
+          lv_obj_add_flag(ble_pairing_icon, LV_OBJ_FLAG_HIDDEN);
+          USBSerial.println("Error: Failed to create BLE pairing flash timer!");
+        }
+      }
+    } else {
+      if (ble_pairing_flash_timer != NULL) {
+        lv_timer_del(ble_pairing_flash_timer);
+        ble_pairing_flash_timer = NULL;
+      }
+      lv_obj_add_flag(ble_pairing_icon, LV_OBJ_FLAG_HIDDEN);
+      isFlashingBLEPairingIcon = false;
+    }
+  }
+
   // Update climb rate indicator
   static float lastAltitude = 0.0f;
   static uint32_t lastAltitudeTime = 0;

From b1c0d9b13231bd6165c8a2d4e31df81aab935f3f Mon Sep 17 00:00:00 2001
From: Zach Whitehead <zjwhitehead@users.noreply.github.com>
Date: Tue, 7 Apr 2026 20:35:59 -0500
Subject: [PATCH 3/6] Remove BLE reconnect-window logic

Remove the reconnect-window feature and related state/timers from the BLE core (kReconnectWindowTicks, gReconnectWindowTimer, reconnectWindowActive and associated functions). Advertising logic is simplified so bonded devices may always reconnect via whitelist advertising (shouldAdvertiseWhilePowered now checks NimBLEDevice::getNumBonds()). Cleanup removes timer management and reconnect-window handling from connection callbacks, setup, and pairing transition, reducing complexity and reliance on a 5-minute reconnect timer.
---
 src/sp140/ble/ble_core.cpp | 61 ++++----------------------------------
 1 file changed, 5 insertions(+), 56 deletions(-)

diff --git a/src/sp140/ble/ble_core.cpp b/src/sp140/ble/ble_core.cpp
index 75d5f5fc..2a9345c6 100644
--- a/src/sp140/ble/ble_core.cpp
+++ b/src/sp140/ble/ble_core.cpp
@@ -21,16 +21,13 @@ namespace {
 constexpr size_t kAdvertisingNameCapacity = 32;
 constexpr TickType_t kConnTuneDelayTicks = pdMS_TO_TICKS(1200);
 constexpr TickType_t kPairingTimeoutTicks = pdMS_TO_TICKS(60000);
-constexpr TickType_t kReconnectWindowTicks = pdMS_TO_TICKS(300000);  // 5 min
 constexpr TickType_t kAdvertisingWatchdogTicks = pdMS_TO_TICKS(1000);
 TimerHandle_t gConnTuneTimer = nullptr;
 TimerHandle_t gPairingTimer = nullptr;
-TimerHandle_t gReconnectWindowTimer = nullptr;
 TimerHandle_t gAdvertisingWatchdogTimer = nullptr;
 char gAdvertisingName[kAdvertisingNameCapacity];
 bool pairingModeActive = false;
 bool pairingModeTransitionActive = false;
-bool reconnectWindowActive = false;
 
 // Store the active connection handle for conn param updates
 uint16_t activeConnHandle = 0;
@@ -65,40 +62,6 @@ void stopPairingModeTimer() {
   }
 }
 
-void stopReconnectWindowTimer() {
-  if (gReconnectWindowTimer != nullptr) {
-    xTimerStop(gReconnectWindowTimer, 0);
-  }
-}
-
-void onReconnectWindowTimeout(TimerHandle_t timer) {
-  (void)timer;
-  reconnectWindowActive = false;
-  USBSerial.println("[BLE] Reconnect window expired; stopping advertising");
-  restartBLEAdvertising();
-}
-
-void startReconnectWindowTimer() {
-  reconnectWindowActive = true;
-  if (gReconnectWindowTimer == nullptr) {
-    gReconnectWindowTimer = xTimerCreate("bleReconn", kReconnectWindowTicks,
-                                         pdFALSE, nullptr,
-                                         onReconnectWindowTimeout);
-  }
-  if (gReconnectWindowTimer != nullptr) {
-    xTimerStop(gReconnectWindowTimer, 0);
-    xTimerStart(gReconnectWindowTimer, 0);
-  }
-}
-
-void initReconnectWindowFromBoot() {
-  if (NimBLEDevice::getNumBonds() > 0) {
-    startReconnectWindowTimer();
-    USBSerial.println("[BLE] Reconnect window active (5 min)");
-  } else {
-    reconnectWindowActive = false;
-  }
-}
 
 size_t syncWhiteListFromBonds() {
   // Reconcile the whitelist to the current bond store. Advertising must be
@@ -148,7 +111,8 @@ void applyPreferredLinkParams(TimerHandle_t timer) {
 
 bool shouldAdvertiseWhilePowered() {
   return !pairingModeTransitionActive &&
-         (pairingModeActive || reconnectWindowActive);
+         (pairingModeActive ||
+          NimBLEDevice::getNumBonds() > 0);
 }
 
 bool startAdvertising(NimBLEServer *server) {
@@ -172,11 +136,9 @@ bool startAdvertising(NimBLEServer *server) {
     return false;
   }
 
-  if (!allowOpenAdvertising && bondCount > 0 && !reconnectWindowActive) {
-    USBSerial.println(
-        "[BLE] Reconnect window inactive; whitelist advertising not started");
-    return false;
-  }
+  // Bonded devices can always reconnect via whitelist advertising —
+  // no reconnect window gating.  Power draw is negligible for
+  // whitelist-only advertising.
 
 #if CONFIG_BT_NIMBLE_EXT_ADV
   // Legacy connectable undirected advertising via the extended API.
@@ -272,9 +234,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
     deviceConnected = true;
     connectedHandle = connInfo.getConnHandle();
 
-    stopReconnectWindowTimer();
-    reconnectWindowActive = false;
-
     if (gConnTuneTimer != nullptr) {
       xTimerStop(gConnTuneTimer, 0);
       xTimerStart(gConnTuneTimer, 0);
@@ -313,12 +272,6 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
     // Suppress the immediate advertising restart during a pairing transition —
     // enterBLEPairingMode() issues its own startAdvertising after clearing bonds.
     if (!pairingModeTransitionActive) {
-      if (NimBLEDevice::getNumBonds() > 0) {
-        startReconnectWindowTimer();
-      } else {
-        reconnectWindowActive = false;
-        stopReconnectWindowTimer();
-      }
       startAdvertising(server);
     }
   }
@@ -420,8 +373,6 @@ void setupBLE() {
   USBSerial.println("[BLE] BLE_PAIR_ON_BOOT: entering pairing mode automatically");
   enterBLEPairingMode();
 #endif
-  // After optional boot pairing: start reconnect window only if bonds remain.
-  initReconnectWindowFromBoot();
   if (shouldAdvertiseWhilePowered()) {
     restartBLEAdvertising();
   }
@@ -454,8 +405,6 @@ void restartBLEAdvertising() {
 void enterBLEPairingMode() {
   // Block advertising restarts (e.g. from onDisconnect) during this transition.
   pairingModeTransitionActive = true;
-  stopReconnectWindowTimer();
-  reconnectWindowActive = false;
 
   // Single-bond model: disconnect the current peer so we can safely clear bonds.
   if (deviceConnected && pServer != nullptr &&

From 37e9292a4422af56dbe909601ef59e7bc835d73f Mon Sep 17 00:00:00 2001
From: Zach Whitehead <zjwhitehead@users.noreply.github.com>
Date: Wed, 8 Apr 2026 16:29:32 -0500
Subject: [PATCH 4/6] Handle splash screen and force main repaint

Capture and remove the LVGL splash screen to avoid leftover objects and force an initial repaint of the main screen before other tasks contend for SPI. Added a splash_screen pointer (lv_screen_active()), invalidate and refresh the main_display immediately (lv_obj_invalidate + lv_refr_now), and delete the splash screen if it differs from the main screen. Also cleaned up .vscode/extensions.json by removing a duplicate PlatformIO recommendation.
---
 .vscode/extensions.json |  3 +--
 src/sp140/main.cpp      | 11 +++++++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/.vscode/extensions.json b/.vscode/extensions.json
index dc42e991..f45a9d62 100644
--- a/.vscode/extensions.json
+++ b/.vscode/extensions.json
@@ -3,8 +3,7 @@
     // for the documentation about the extensions.json format
     "recommendations": [
         "ms-vscode.cpptools-extension-pack",
-        "pioarduino.pioarduino-ide",
-        "platformio.platformio-ide"
+        "pioarduino.pioarduino-ide"
     ],
     "unwantedRecommendations": [
         "ms-vscode.cpptools-extension-pack"
diff --git a/src/sp140/main.cpp b/src/sp140/main.cpp
index 41d762f4..174e77ff 100644
--- a/src/sp140/main.cpp
+++ b/src/sp140/main.cpp
@@ -769,8 +769,10 @@ void setup() {
   setLEDColor(LED_GREEN);
 
   // Show splash screen (blocking)
+  lv_obj_t* splash_screen = NULL;
   if (xSemaphoreTake(lvglMutex, portMAX_DELAY) == pdTRUE) {
     displayLvglSplash(deviceData, 2000);
+    splash_screen = lv_screen_active();
     // Keep mutex held through main screen setup
   } else {
     USBSerial.println("Failed to acquire LVGL mutex for splash");
@@ -782,9 +784,14 @@ void setup() {
     setupMainScreen(deviceData.theme == 1);
   }
 
-  // Load main screen
+  // Force the first main-screen repaint before other tasks can contend for SPI.
   if (main_screen != NULL) {
-    lv_screen_load(main_screen);
+    lv_obj_invalidate(main_screen);
+    lv_refr_now(main_display);
+    if (splash_screen != NULL && splash_screen != main_screen) {
+      lv_obj_delete(splash_screen);
+      splash_screen = NULL;
+    }
     USBSerial.println("Main screen loaded");
   } else {
     USBSerial.println("Error: Main screen object is NULL after setup attempt");

From 418d1328c36abf3ed7494ed81bcca9b4892777ba Mon Sep 17 00:00:00 2001
From: Paul <36135447+PaulDWhite@users.noreply.github.com>
Date: Thu, 16 Apr 2026 21:23:57 -0400
Subject: [PATCH 5/6] ESC lights/beeps, baro cache, and UI sync

Introduce ESC status light modes and motor beep queuing, add cached barometer/altitude/vertical-speed getters, and reduce cross-task I2C/CAN contention. Key changes:

- esc.h / esc.cpp: add EscStatusLightMode enum and APIs to request status lights and queue motor beeps; implement LED patterns, motor-tone building, and sync logic to send outputs only when ESC is connected.
- altimeter.h / altimeter.cpp: add cached getters (altitude, baro temp, vertical speed), compute vertical speed from buffer, seed and retry BMP3xx init to avoid transient I2C failures, and update cache on reads to allow safe cross-task access.
- alert_display.h / alert_display.cpp: track ESC/BMS-specific active alert counts and expose getEscBmsAlertCounts() used to influence ESC lights.
- main.cpp: prefer cached getters in non-I2C tasks, restructure changeDeviceState to minimize mutex hold time and side effects outside critical section, use status LED constants, queue ESC beeps on arm/disarm, avoid direct CAN throttle writes from disarm, and use non-blocking queue overwrite for throttle/cruise updates.
- utilities.h: rename LED macros to STATUS_LED_* for controller status semantics.
- buzzer.cpp / audioTask: increase default melody duration and add short silence between notes for separation.
- system_monitors.cpp: re-enable Baro_Temp monitor using cached getter to avoid I2C access from monitors.
- platformio.ini / extra_script.py / .claude/settings.local.json: adjust project src_dir and build flags, update a lib dep commit hash, clean up extra_script usage, and add a couple shell checks for CI.

Overall these changes improve robustness against I2C/CAN races, provide cross-task-safe sensor values, and add ESC visual/audio feedback tied to alert state.
---
 .claude/settings.local.json   |   4 +-
 extra_script.py               |   6 --
 inc/sp140/alert_display.h     |   3 +
 inc/sp140/altimeter.h         |   6 ++
 inc/sp140/esc.h               |  17 ++++
 inc/sp140/utilities.h         |  28 ++----
 platformio.ini                |  11 ++-
 src/sp140/alert_display.cpp   |  15 +++
 src/sp140/altimeter.cpp       |  58 ++++++++++-
 src/sp140/buzzer.cpp          |   2 +-
 src/sp140/esc.cpp             | 166 +++++++++++++++++++++++++++++++
 src/sp140/main.cpp            | 177 +++++++++++++++++++++-------------
 src/sp140/system_monitors.cpp |  24 ++---
 13 files changed, 404 insertions(+), 113 deletions(-)

diff --git a/.claude/settings.local.json b/.claude/settings.local.json
index 87bf95aa..c8ac9f4f 100644
--- a/.claude/settings.local.json
+++ b/.claude/settings.local.json
@@ -6,7 +6,9 @@
       "Bash(cpplint:*)",
       "Bash(grep:*)",
       "Bash(pio test:*)",
-      "Bash(pio run:*)"
+      "Bash(pio run:*)",
+      "Bash(pio --version)",
+      "Bash(python -c \"import platformio; print\\(platformio.__file__\\)\")"
     ],
     "deny": []
   }
diff --git a/extra_script.py b/extra_script.py
index d4ef0ae4..8da3c942 100644
--- a/extra_script.py
+++ b/extra_script.py
@@ -2,12 +2,6 @@
 import subprocess
 
 Import("env")
-folder = env.GetProjectOption("custom_src_folder")
-
-# Generic
-env.Replace(
-    PROJECT_SRC_DIR="$PROJECT_DIR/src/" + folder
-)
 
 def get_git_revision_short_hash():
     try:
diff --git a/inc/sp140/alert_display.h b/inc/sp140/alert_display.h
index d6e4d62d..6a8058dd 100644
--- a/inc/sp140/alert_display.h
+++ b/inc/sp140/alert_display.h
@@ -73,6 +73,9 @@ void updateAlertCounterDisplay(const AlertCounts& counts);
 // Helper for monitors/UI logger to push alert events
 void sendAlertEvent(SensorID id, AlertLevel level);
 
+// Current active alert counts limited to ESC and BMS categories.
+AlertCounts getEscBmsAlertCounts();
+
 // ILogger sink that pushes events to the alert queue (for UI)
 struct AlertUILogger : ILogger {
   void log(SensorID id, AlertLevel lvl, float v) override {
diff --git a/inc/sp140/altimeter.h b/inc/sp140/altimeter.h
index fddd2ce1..f09d2afa 100644
--- a/inc/sp140/altimeter.h
+++ b/inc/sp140/altimeter.h
@@ -29,4 +29,10 @@ float getBaroTemperature();
 // Get the pressure in hPa
 float getBaroPressure();
 
+// Cached getters — safe to call from any task (atomic float reads on Xtensa).
+// Populated by the designated I2C reader (uiTask via getAltitude()).
+float getCachedAltitude();
+float getCachedBaroTemperature();
+float getCachedVerticalSpeed();
+
 #endif  // INC_SP140_ALTIMETER_H_
diff --git a/inc/sp140/esc.h b/inc/sp140/esc.h
index 939019f7..86f43529 100644
--- a/inc/sp140/esc.h
+++ b/inc/sp140/esc.h
@@ -15,6 +15,16 @@ inline bool isMotorTempValidC(float tempC) {
 #include <SineEsc.h>
 #include <CanardAdapter.h>
 
+enum class EscStatusLightMode : uint8_t {
+  OFF = 0,
+  DISARMED_NOMINAL,
+  DISARMED_WARNING,
+  DISARMED_CRITICAL,
+  FLIGHT_NOMINAL,
+  FLIGHT_WARNING,
+  FLIGHT_CRITICAL,
+};
+
 void initESC();
 void setESCThrottle(int throttlePWM);
 void readESCTelemetry();
@@ -58,6 +68,13 @@ bool hasMotorIDet2Error(uint16_t errorCode);
 bool hasSwHwIncompatError(uint16_t errorCode);
 bool hasBootloaderBadError(uint16_t errorCode);
 
+// ESC LED control
+void requestEscStatusLightMode(EscStatusLightMode mode);
+
+// ESC motor beep
+void queueEscMotorBeepArm();
+void queueEscMotorBeepDisarm();
+
 // for debugging
 void dumpThrottleResponse(const sine_esc_SetThrottleSettings2Response *res);
 void dumpESCMessages();  // dumps all messages to USBSerial
diff --git a/inc/sp140/utilities.h b/inc/sp140/utilities.h
index 3ab16967..c83cca48 100644
--- a/inc/sp140/utilities.h
+++ b/inc/sp140/utilities.h
@@ -1,22 +1,14 @@
-#ifndef INC_SP140_UTILITIES_H_
-#define INC_SP140_UTILITIES_H_
-
-#include <Arduino.h>
-
-// Function to get unique chip ID
-String chipId();
+#ifndef INC_SP140_UTILITIES_H_
+#define INC_SP140_UTILITIES_H_
 
-// Definitions for main rainbow colors in WRGB format for NeoPixel.
-// The 32-bit color value is WRGB. W (White) is ignored for RGB pixels.
-// The next bytes are R (Red), G (Green), and B (Blue).
-// For example, YELLOW is 0x00FFFF00, with FF for Red and Green, and 00 for Blue.
+#include <Arduino.h>
 
-#define LED_RED 0x00FF0000
-#define LED_ORANGE 0x00FF7F00
-#define LED_YELLOW 0x00FFFF00
-#define LED_GREEN 0x0000FF00
-#define LED_BLUE 0x000000FF
-#define LED_INDIGO 0x004B0082
-#define LED_VIOLET 0x008000FF
+// Function to get unique chip ID
+String chipId();
+
+// Controller status LED colors in WRGB format for NeoPixel.
+#define STATUS_LED_RED 0x00FF0000
+#define STATUS_LED_YELLOW 0x00FFFF00
+#define STATUS_LED_GREEN 0x0000FF00
 
 #endif  // INC_SP140_UTILITIES_H_
diff --git a/platformio.ini b/platformio.ini
index 00f46887..dd95c62f 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -11,6 +11,7 @@
 [platformio]
 lib_dir = libraries
 include_dir = inc
+src_dir = src/sp140
 default_envs =
 	OpenPPG-CESP32S3-CAN-SP140
 
@@ -27,7 +28,6 @@ framework = arduino, espidf
 board_build.f_cpu = 240000000L
 board_build.flash_mode = qio
 board_build.partitions = default_8MB.csv
-custom_src_folder = sp140 ; Used by extra_script.py to rewrite PROJECT_SRC_DIR
 ; If esptool.py complains about missing intelhex, install into the tool package:
 ;   ~/.platformio/penv/bin/python -m pip install intelhex -t ~/.platformio/packages/tool-esptoolpy
 extra_scripts =
@@ -42,6 +42,7 @@ build_flags =
 	-D CORE_DEBUG_LEVEL=2
 	-D CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
 	-Wno-error=format
+	-Wno-error=int-in-bool-context
 	;-D BLE_PAIR_ON_BOOT
 build_type = debug
 debug_speed = 12000
@@ -58,7 +59,7 @@ lib_deps =
 	adafruit/Adafruit CAN@0.2.3
 	adafruit/Adafruit MCP2515@0.2.1
 	https://github.com/rlogiacco/CircularBuffer@1.4.0
-	https://github.com/openppg/SINE-ESC-CAN#8caa93996b5d000fe10ca5265bd1c472dfdf885b
+	https://github.com/openppg/SINE-ESC-CAN#2ab56a4e5b52e4456317c8ee3e3d802b232c6148
 	https://github.com/openppg/ANT-BMS-CAN#fd54852bc6f1c9608e37af9ca7c13ea4135c095b
 	lvgl/lvgl@^9.5.0
 	h2zero/NimBLE-Arduino@^2.3.9
@@ -105,9 +106,9 @@ build_flags =
   -std=c++17
 build_src_filter =
   -<*>
-  +<sp140/lvgl/lvgl_main_screen.cpp>
-  +<sp140/lvgl/lvgl_updates.cpp>
-  +<sp140/lvgl/lvgl_alerts.cpp>
+  +<lvgl/lvgl_main_screen.cpp>
+  +<lvgl/lvgl_updates.cpp>
+  +<lvgl/lvgl_alerts.cpp>
 test_filter = test_screenshots
 lib_deps =
   lvgl/lvgl@^9.5.0
diff --git a/src/sp140/alert_display.cpp b/src/sp140/alert_display.cpp
index ed0c324e..7b6dfa19 100644
--- a/src/sp140/alert_display.cpp
+++ b/src/sp140/alert_display.cpp
@@ -18,6 +18,7 @@ static std::map<SensorID, AlertLevel> g_currentLevels;
 static AlertCounts g_currentCounts = {0, 0};
 static AlertCounts g_previousCounts = {0, 0};  // Track previous counts for transitions
 static uint32_t g_epoch = 0;
+static AlertCounts g_escBmsCounts = {0, 0};
 
 // Rotation state for display - separate lists for warnings and criticals
 static std::vector<SensorID> g_critList;
@@ -31,6 +32,12 @@ static void alertAggregationTask(void* parameter);
 static void recalcCountsAndPublish();
 static void handleAlertVibration(const AlertCounts& newCounts, const AlertCounts& previousCounts);
 
+static bool isEscOrBmsSensor(SensorID id) {
+  return id >= SensorID::ESC_MOS_Temp && id <= SensorID::BMS_CAN_Init_Failure;
+}
+
+AlertCounts getEscBmsAlertCounts() { return g_escBmsCounts; }
+
 // ------------ Public helpers -------------
 void initAlertDisplay() {
   // Create queues – small, non-blocking
@@ -131,6 +138,7 @@ static void alertAggregationTask(void* parameter) {
 static void recalcCountsAndPublish() {
   AlertCounts counts{0, 0};
   std::vector<SensorID> newCritList;
+  AlertCounts escBmsCounts{0, 0};
   std::vector<SensorID> newWarnList;
   for (const auto& kv : g_currentLevels) {
     switch (kv.second) {
@@ -138,11 +146,17 @@ static void recalcCountsAndPublish() {
       case AlertLevel::WARN_HIGH:
         newWarnList.push_back(kv.first);
         counts.warningCount++;
+        if (isEscOrBmsSensor(kv.first)) {
+          escBmsCounts.warningCount++;
+        }
         break;
       case AlertLevel::CRIT_LOW:
       case AlertLevel::CRIT_HIGH:
         newCritList.push_back(kv.first);
         counts.criticalCount++;
+        if (isEscOrBmsSensor(kv.first)) {
+          escBmsCounts.criticalCount++;
+        }
         break;
       default:
         break;
@@ -150,6 +164,7 @@ static void recalcCountsAndPublish() {
   }
 
   // Handle vibration alerts based on count changes
+  g_escBmsCounts = escBmsCounts;
   handleAlertVibration(counts, g_previousCounts);
   g_previousCounts = counts;
 
diff --git a/src/sp140/altimeter.cpp b/src/sp140/altimeter.cpp
index 8d3e0ddb..fc5a3e68 100644
--- a/src/sp140/altimeter.cpp
+++ b/src/sp140/altimeter.cpp
@@ -16,6 +16,28 @@ struct AltitudeReading {
 // Buffer to store altitude readings with timestamps
 CircularBuffer<AltitudeReading, VARIO_BUFFER_SIZE> altitudeBuffer;
 
+// Cached values — written by the designated I2C reader (uiTask via getAltitude),
+// safe to read from any task (32-bit float reads are atomic on Xtensa).
+static float cachedAltitude = 0.0f;
+static float cachedBaroTemperature = __FLT_MIN__;
+static float cachedVerticalSpeed = 0.0f;
+
+// Recompute vertical speed from the altitude buffer. Must be called from the
+// same task that pushes to altitudeBuffer (uiTask) to avoid CircularBuffer races.
+static float computeVerticalSpeed() {
+  if (altitudeBuffer.size() < 2) {
+    return 0.0f;
+  }
+  const AltitudeReading& oldest = altitudeBuffer.first();
+  const AltitudeReading& newest = altitudeBuffer.last();
+  float timeDiff = (newest.timestamp - oldest.timestamp) / 1000.0f;
+  if (timeDiff <= 0) {
+    return 0.0f;
+  }
+  float verticalSpeed = (newest.altitude - oldest.altitude) / timeDiff;
+  return constrain(verticalSpeed, -MAX_VERTICAL_SPEED, MAX_VERTICAL_SPEED);
+}
+
 float getAltitude(const STR_DEVICE_DATA_140_V1& deviceData) {
   if (bmpPresent && i2cMutex != nullptr) {
     if (xSemaphoreTake(i2cMutex, pdMS_TO_TICKS(20)) == pdTRUE) {
@@ -27,6 +49,10 @@ float getAltitude(const STR_DEVICE_DATA_140_V1& deviceData) {
       AltitudeReading reading = {relativeAltitude, millis()};
       altitudeBuffer.push(reading);
 
+      // Update caches (atomic 32-bit float writes on Xtensa)
+      cachedAltitude = relativeAltitude;
+      cachedVerticalSpeed = computeVerticalSpeed();
+
       return relativeAltitude;
     }
   }
@@ -72,12 +98,18 @@ float getBaroTemperature() {
     if (xSemaphoreTake(i2cMutex, pdMS_TO_TICKS(20)) == pdTRUE) {
       float temp = bmp.readTemperature();
       xSemaphoreGive(i2cMutex);
+      cachedBaroTemperature = temp;  // Update cache for cross-task reads
       return temp;
     }
   }
   return __FLT_MIN__;
 }
 
+// Cached getters — safe to call from any task (atomic float reads on Xtensa).
+float getCachedAltitude() { return cachedAltitude; }
+float getCachedBaroTemperature() { return cachedBaroTemperature; }
+float getCachedVerticalSpeed() { return cachedVerticalSpeed; }
+
 // Get the pressure in hPa
 float getBaroPressure() {
   if (bmpPresent && i2cMutex != nullptr) {
@@ -97,13 +129,37 @@ bool setupAltimeter() {
   // pull down pin 40 to high to set the address
   pinMode(40, OUTPUT);
   digitalWrite(40, HIGH);
-  if (!bmp.begin_I2C(BMP3XX_DEFAULT_ADDRESS, &Wire)) return false;
+
+  // Give the BMP3xx time to finish powering up after cold boot.
+  // Without this, the first begin_I2C() occasionally fails before the
+  // sensor is ready, leaving bmpPresent=false for the whole session and
+  // tripping the Baro_Init_Failure alert.
+  delay(20);
+
+  // Retry a few times — most failures here are transient I2C timing races.
+  const int kInitAttempts = 4;
+  bool ok = false;
+  for (int i = 1; i <= kInitAttempts; i++) {
+    if (bmp.begin_I2C(BMP3XX_DEFAULT_ADDRESS, &Wire)) {
+      ok = true;
+      if (i > 1) {
+        USBSerial.printf("BMP3xx initialized on attempt %d\n", i);
+      }
+      break;
+    }
+    USBSerial.printf("BMP3xx init attempt %d/%d failed\n", i, kInitAttempts);
+    delay(50);
+  }
+  if (!ok) return false;
 
   bmp.setOutputDataRate(BMP3_ODR_25_HZ);
   bmp.setTemperatureOversampling(BMP3_OVERSAMPLING_2X);
   bmp.setPressureOversampling(BMP3_OVERSAMPLING_4X);
   bmp.setIIRFilterCoeff(BMP3_IIR_FILTER_COEFF_15);
   bmp.readPressure();  // throw away first reading
+  // Seed the temperature cache so monitors and telemetry don't see __FLT_MIN__
+  // until the first periodic read populates it.
+  cachedBaroTemperature = bmp.readTemperature();
   bmpPresent = true;
   return true;
 }
diff --git a/src/sp140/buzzer.cpp b/src/sp140/buzzer.cpp
index 4e4bde65..2ac34ea1 100644
--- a/src/sp140/buzzer.cpp
+++ b/src/sp140/buzzer.cpp
@@ -79,7 +79,7 @@ bool playMelody(uint16_t melody[], int siz) {
   MelodyRequest request = {
     .notes = melodyBuffer,
     .size = (uint8_t)std::min(siz, 32),
-    .duration = 100  // Default duration
+    .duration = 200  // Default duration
   };
 
   // Send to queue with timeout
diff --git a/src/sp140/esc.cpp b/src/sp140/esc.cpp
index 8bc476ec..a78c79ff 100644
--- a/src/sp140/esc.cpp
+++ b/src/sp140/esc.cpp
@@ -25,6 +25,159 @@ static uint16_t sEscLastTime10ms = 0;
 static uint32_t sEscAccumulatedRuntimeMs = 0;
 static bool sEscFirstUpdate = true;
 
+enum class PendingEscTone : uint8_t {
+  NONE = 0,
+  ARM,
+  DISARM,
+};
+
+static volatile EscStatusLightMode sRequestedStatusLightMode =
+    EscStatusLightMode::OFF;
+static EscStatusLightMode sLastSentStatusLightMode = EscStatusLightMode::OFF;
+static unsigned long sLastStatusLightSendMs = 0;
+static bool sHaveSentStatusLight = false;
+static volatile PendingEscTone sPendingEscTone = PendingEscTone::NONE;
+
+namespace {
+
+constexpr uint8_t kEscToneLow = 2;
+constexpr uint8_t kEscToneHigh = 8;
+constexpr uint8_t kEscToneVolumePct = 80;
+constexpr uint8_t kEscToneDuration10ms = 20;
+
+// Caller must pass ARM or DISARM (never NONE).
+void buildEscMotorTone(uint8_t* out, PendingEscTone tone) {
+  if (tone == PendingEscTone::ARM) {
+    SineEsc::makeBeepEntry(&out[0], kEscToneLow, kEscToneDuration10ms, kEscToneVolumePct);
+    SineEsc::makeBeepEntry(&out[3], kEscToneHigh, kEscToneDuration10ms, kEscToneVolumePct);
+  } else {
+    SineEsc::makeBeepEntry(&out[0], kEscToneHigh, kEscToneDuration10ms, kEscToneVolumePct);
+    SineEsc::makeBeepEntry(&out[3], kEscToneLow, kEscToneDuration10ms, kEscToneVolumePct);
+  }
+}
+
+unsigned long escStatusLightRefreshMs(EscStatusLightMode mode) {
+  switch (mode) {
+  case EscStatusLightMode::FLIGHT_NOMINAL:
+  case EscStatusLightMode::FLIGHT_WARNING:
+  case EscStatusLightMode::FLIGHT_CRITICAL:
+    return 0;
+  case EscStatusLightMode::DISARMED_NOMINAL:
+  case EscStatusLightMode::DISARMED_WARNING:
+  case EscStatusLightMode::DISARMED_CRITICAL:
+    return 0;
+  case EscStatusLightMode::OFF:
+  default:
+    return 0;
+  }
+}
+
+void sendEscStatusLight(EscStatusLightMode mode) {
+  switch (mode) {
+  case EscStatusLightMode::DISARMED_NOMINAL: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_GREEN_BREATH, 60),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 20),
+    };
+    esc.setLedControl(pattern, 2);
+    break;
+  }
+  case EscStatusLightMode::DISARMED_WARNING: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_YELLOW_BREATH, 60),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 20),
+    };
+    esc.setLedControl(pattern, 2);
+    break;
+  }
+  case EscStatusLightMode::DISARMED_CRITICAL: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_RED_BREATH, 60),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 20),
+    };
+    esc.setLedControl(pattern, 2);
+    break;
+  }
+  case EscStatusLightMode::FLIGHT_NOMINAL: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_GREEN, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 2),
+      SineEsc::makeLedControlEntry(SineEsc::LED_GREEN, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 30),
+    };
+    esc.setLedControl(pattern, 4);
+    break;
+  }
+  case EscStatusLightMode::FLIGHT_WARNING: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_YELLOW, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 2),
+      SineEsc::makeLedControlEntry(SineEsc::LED_YELLOW, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 30),
+    };
+    esc.setLedControl(pattern, 4);
+    break;
+  }
+  case EscStatusLightMode::FLIGHT_CRITICAL: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_RED, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 2),
+      SineEsc::makeLedControlEntry(SineEsc::LED_RED, 1),
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 30),
+    };
+    esc.setLedControl(pattern, 4);
+    break;
+  }
+  case EscStatusLightMode::OFF:
+  default: {
+    const uint16_t pattern[] = {
+      SineEsc::makeLedControlEntry(SineEsc::LED_OFF, 20),
+    };
+    esc.setLedControl(pattern, 1);
+    break;
+  }
+  }
+}
+
+void syncEscOutputs() {
+  const bool escConnected =
+      escTwaiInitialized &&
+      escTelemetryData.escState == TelemetryState::CONNECTED;
+
+  if (!escConnected) {
+    sPendingEscTone = PendingEscTone::NONE;
+    sHaveSentStatusLight = false;
+    sLastSentStatusLightMode = EscStatusLightMode::OFF;
+    sLastStatusLightSendMs = 0;
+    return;
+  }
+
+  const PendingEscTone pendingTone = sPendingEscTone;
+  if (pendingTone != PendingEscTone::NONE) {
+    uint8_t beepData[6];
+    buildEscMotorTone(beepData, pendingTone);
+    esc.setMotorSound(beepData, 2);
+    sPendingEscTone = PendingEscTone::NONE;
+  }
+
+  const EscStatusLightMode requestedMode = sRequestedStatusLightMode;
+  const unsigned long now = millis();
+  const bool needsRefresh =
+      sHaveSentStatusLight &&
+      escStatusLightRefreshMs(requestedMode) > 0 &&
+      (now - sLastStatusLightSendMs) >= escStatusLightRefreshMs(requestedMode);
+
+  if (!sHaveSentStatusLight || requestedMode != sLastSentStatusLightMode ||
+      needsRefresh) {
+    sendEscStatusLight(requestedMode);
+    sLastSentStatusLightMode = requestedMode;
+    sLastStatusLightSendMs = now;
+    sHaveSentStatusLight = true;
+  }
+}
+
+}  // namespace
+
 
 STR_ESC_TELEMETRY_140 escTelemetryData = {
   .escState = TelemetryState::NOT_CONNECTED,
@@ -182,6 +335,7 @@ void readESCTelemetry() {
     memcpy(escTelemetryData.sn_code, hw->sn_code, sizeof(escTelemetryData.sn_code));
   }
 
+  syncEscOutputs();
   adapter.processTxRxOnce();  // Process CAN messages
 }
 
@@ -195,6 +349,18 @@ void requestEscHardwareInfo() {
   s_hwInfoRequested = true;
 }
 
+void requestEscStatusLightMode(EscStatusLightMode mode) {
+  sRequestedStatusLightMode = mode;
+}
+
+void queueEscMotorBeepArm() {
+  sPendingEscTone = PendingEscTone::ARM;
+}
+
+void queueEscMotorBeepDisarm() {
+  sPendingEscTone = PendingEscTone::DISARM;
+}
+
 /**
  * Setup the ESP32 TWAI (Two-Wire Automotive Interface) for CAN communication
  * Configures the CAN bus at 1Mbps for communication with the ESC
diff --git a/src/sp140/main.cpp b/src/sp140/main.cpp
index 174e77ff..297a9e4a 100644
--- a/src/sp140/main.cpp
+++ b/src/sp140/main.cpp
@@ -22,6 +22,7 @@
 
 #include "../../inc/sp140/alert_display.h"
 #include "../../inc/sp140/altimeter.h"
+#include "../../inc/sp140/system_monitors.h"
 #include "../../inc/sp140/ble.h"
 #include "../../inc/sp140/ble/ble_core.h"
 #include "../../inc/sp140/ble/config_service.h"
@@ -107,7 +108,7 @@ UnifiedBatteryData unifiedBatteryData = {0.0f, 0.0f, 0.0f, 0.0f};  // volts, amp
 // Throttle PWM smoothing buffer is managed in throttle.cpp
 
 Adafruit_NeoPixel pixels(1, 21, NEO_GRB + NEO_KHZ800);
-uint32_t led_color = LED_RED;  // current LED color
+uint32_t led_color = STATUS_LED_RED;  // current LED color
 
 // Global variable for device state
 volatile DeviceState currentState = DISARMED;
@@ -209,49 +210,57 @@ void deviceStateUpdateTask(void *parameter) {
 }
 
 void changeDeviceState(DeviceState newState) {
-  // State changes are safety-critical - must not timeout (especially DISARM)
+  DeviceState oldState;
+
+  // Fast critical section — update state and notify, then release immediately.
+  // Side effects (NVS writes, queue sends, melodies, I2C) run OUTSIDE the mutex
+  // to prevent blocking other tasks that need to read currentState.
   if (xSemaphoreTake(stateMutex, portMAX_DELAY) == pdTRUE) {
-    DeviceState oldState = currentState;
+    oldState = currentState;
     currentState = newState;
 
-    // Send state update to queue
+    // Send state update to queue (non-blocking overwrite)
     uint8_t state = (uint8_t)newState;
     if (deviceStateQueue != NULL) {
       xQueueOverwrite(deviceStateQueue, &state);  // Always use latest state
     }
 
-    USBSerial.print("Device State Changed to: ");
-    switch (newState) {
-    case DISARMED:
-      USBSerial.println("DISARMED");
-      break;
-    case ARMED:
-      USBSerial.println("ARMED");
-      break;
-    case ARMED_CRUISING:
-      USBSerial.println("ARMED_CRUISING");
-      break;
-    }
+    xSemaphoreGive(stateMutex);
+  } else {
+    return;  // Should never happen with portMAX_DELAY
+  }
 
-    // Handle state transition actions
-    switch (newState) {
-    case DISARMED:
-      disarmSystem();
-      break;
-    case ARMED:
-      if (oldState == DISARMED) {
-        armSystem();
-      } else if (oldState == ARMED_CRUISING) {
-        afterCruiseEnd();
-      }
-      break;
-    case ARMED_CRUISING:
-      if (oldState == ARMED) {
-        afterCruiseStart();
-      }
-      break;
+  // Side effects outside the mutex
+  USBSerial.print("Device State Changed to: ");
+  switch (newState) {
+  case DISARMED:
+    USBSerial.println("DISARMED");
+    break;
+  case ARMED:
+    USBSerial.println("ARMED");
+    break;
+  case ARMED_CRUISING:
+    USBSerial.println("ARMED_CRUISING");
+    break;
+  }
+
+  // Handle state transition actions
+  switch (newState) {
+  case DISARMED:
+    disarmSystem();
+    break;
+  case ARMED:
+    if (oldState == DISARMED) {
+      armSystem();
+    } else if (oldState == ARMED_CRUISING) {
+      afterCruiseEnd();
     }
-    xSemaphoreGive(stateMutex);
+    break;
+  case ARMED_CRUISING:
+    if (oldState == ARMED) {
+      afterCruiseStart();
+    }
+    break;
   }
 }
 
@@ -350,6 +359,10 @@ void throttleTask(void *pvParameters) {
 }
 
 // Lightweight task: reads controller sensors and writes to TelemetryHub at 10Hz.
+// Uses CACHED barometer/CPU values — uiTask is the sole I2C reader, and
+// getCachedCpuTemperature throttles tsens access. This avoids i2cMutex
+// contention and the "tsens: Do not configure..." error that arises when
+// multiple tasks call temperatureRead() concurrently.
 void ctrlSensorTask(void *pvParameters) {
   (void)pvParameters;
   TickType_t lastWake = xTaskGetTickCount();
@@ -357,11 +370,13 @@ void ctrlSensorTask(void *pvParameters) {
 
   for (;;) {
     const unsigned long now = millis();
-    float alt = getAltitude(deviceData);
+    float alt = getCachedAltitude();
+    // Direct read for baro temp (at 10Hz) — cheap I2C call, keeps the
+    // cached value fresh for the Baro_Temp monitor which reads the cache.
     float bt = getBaroTemperature();
     float bp = getBaroPressure();
-    float vs = getVerticalSpeed();
-    float mt = temperatureRead();
+    float vs = getCachedVerticalSpeed();
+    float mt = getCachedCpuTemperature();
     uint16_t pr = getLastThrottleRaw();
     telemetryHubWriteController(alt, bt, bp, vs, mt, pr, now);
     vTaskDelayUntil(&lastWake, sensorTicks);
@@ -393,22 +408,19 @@ void refreshDisplay() {
     return;
   }
 
-  if (xSemaphoreTake(lvglMutex, pdMS_TO_TICKS(40)) == pdTRUE) {
-    // Get the current relative altitude (updates buffer for vario)
-    // WORKAROUND: Cache last good altitude to avoid brief "ERR" flashes caused
-    // by I2C mutex contention between this task (20Hz) and ctrlSensorTask (10Hz).
-    // Both call getAltitude() which competes for i2cMutex with a 20ms timeout.
-    // TODO: Ideally the UI should read altitude from TelemetryHub (already
-    // populated by ctrlSensorTask) to eliminate the contention entirely, but
-    // that change needs careful integration testing with BLE FastLink telemetry.
-    static float lastGoodAltitude = 0.0f;
-    const float rawAltitude = getAltitude(deviceData);
-    if (rawAltitude != __FLT_MIN__) {
-      lastGoodAltitude = rawAltitude;
-    }
-    const float currentRelativeAltitude =
-        (rawAltitude != __FLT_MIN__) ? rawAltitude : lastGoodAltitude;
+  // Read barometer OUTSIDE lvglMutex. uiTask is the designated sole I2C
+  // barometer reader — this call populates the cached* globals in altimeter.cpp
+  // that other tasks read via getCachedAltitude()/etc. Taking i2cMutex inside
+  // lvglMutex was a nested-lock deadlock risk.
+  static float lastGoodAltitude = 0.0f;
+  const float rawAltitude = getAltitude(deviceData);
+  if (rawAltitude != __FLT_MIN__) {
+    lastGoodAltitude = rawAltitude;
+  }
+  const float currentRelativeAltitude =
+      (rawAltitude != __FLT_MIN__) ? rawAltitude : lastGoodAltitude;
 
+  if (xSemaphoreTake(lvglMutex, pdMS_TO_TICKS(40)) == pdTRUE) {
     // Determine the altitude to show on the display
     float altitudeToShow = 0.0f;  // Default to 0
     if (currentState != DISARMED) {
@@ -735,7 +747,7 @@ void setup() {
     initVibeMotor();
   }
 
-  setLEDColor(LED_YELLOW);  // Indicate boot in progress
+  setLEDColor(STATUS_LED_YELLOW);  // Indicate boot in progress
 
   // SPI bus (shared between display and BMS CAN)
   setupSPI(board_config);
@@ -766,7 +778,7 @@ void setup() {
     perfModeSwitch();
   }
 
-  setLEDColor(LED_GREEN);
+  setLEDColor(STATUS_LED_GREEN);
 
   // Show splash screen (blocking)
   lv_obj_t* splash_screen = NULL;
@@ -963,7 +975,11 @@ void printTime(const char *label) {
   USBSerial.println(millis());
 }
 
-void disarmESC() { setESCThrottle(ESC_DISARMED_PWM); }
+void disarmESC() {
+  // Throttle task sends ESC_DISARMED_PWM on its next 20ms cycle
+  // when it sees DISARMED state — no direct CAN write needed here
+  // to avoid race condition with throttle task's canard instance
+}
 
 // reset smoothing
 void resetSmoothing() { throttleFilterClear(); }
@@ -973,8 +989,9 @@ void resumeLEDTask() {
 }
 
 void runDisarmAlert() {
-  u_int16_t disarm_melody[] = {2637, 2093};
+  u_int16_t disarm_melody[] = {1568, 1047};
   playMelody(disarm_melody, 2);
+  queueEscMotorBeepDisarm();
   pulseVibeMotor();
 }
 
@@ -1004,9 +1021,8 @@ void disarmSystem() {
   updateArmedTime();
   writeDeviceData();
 
-  vTaskDelay(pdMS_TO_TICKS(
-      500));  // TODO: just disable button thread to not allow immediate rearming
-  // Set the last disarm time
+  // DISARM_COOLDOWN (500ms, checked in toggleArm) prevents immediate re-arm —
+  // no need to block this task for 500ms.
   lastDisarmTime = millis();
 }
 
@@ -1190,6 +1206,29 @@ void syncESCTelemetry() {
     escTelemetryData.escState = TelemetryState::NOT_CONNECTED;
   }
 
+  const AlertCounts escBmsAlerts = getEscBmsAlertCounts();
+  const bool hasCriticalEscOrBmsAlert = escBmsAlerts.criticalCount > 0;
+  const bool hasWarningEscOrBmsAlert = escBmsAlerts.warningCount > 0;
+  EscStatusLightMode escStatusLightMode = EscStatusLightMode::OFF;
+  if (escTelemetryData.escState == TelemetryState::CONNECTED) {
+    if (currentState == DISARMED) {
+      if (hasCriticalEscOrBmsAlert) {
+        escStatusLightMode = EscStatusLightMode::DISARMED_CRITICAL;
+      } else if (hasWarningEscOrBmsAlert) {
+        escStatusLightMode = EscStatusLightMode::DISARMED_WARNING;
+      } else {
+        escStatusLightMode = EscStatusLightMode::DISARMED_NOMINAL;
+      }
+    } else if (hasCriticalEscOrBmsAlert) {
+      escStatusLightMode = EscStatusLightMode::FLIGHT_CRITICAL;
+    } else if (hasWarningEscOrBmsAlert) {
+      escStatusLightMode = EscStatusLightMode::FLIGHT_WARNING;
+    } else {
+      escStatusLightMode = EscStatusLightMode::FLIGHT_NOMINAL;
+    }
+  }
+  requestEscStatusLightMode(escStatusLightMode);
+
   telemetryHubWriteEsc(escTelemetryData);
 }
 
@@ -1200,9 +1239,10 @@ bool throttleEngaged() { return !throttleSafe(); }
 
 // get the PPG ready to fly
 bool armSystem() {
-  uint16_t arm_melody[] = {2093, 2637};
+  uint16_t arm_melody[] = {1047, 1568};
   // const unsigned int arm_vibes[] = { 1, 85, 1, 85, 1, 85, 1 };
-  setESCThrottle(ESC_DISARMED_PWM);  // initialize the signal to low
+  // Throttle task handles ESC commands exclusively to avoid
+  // race condition on the shared canard CAN bus instance
 
   armedAtMillis = millis();
   armedSecs = 0;  // Reset armed seconds for new session
@@ -1211,6 +1251,7 @@ bool armSystem() {
   vTaskSuspend(blinkLEDTaskHandle);
   setLEDs(HIGH);  // solid LED while armed
   playMelody(arm_melody, 2);
+  queueEscMotorBeepArm();
   // runVibePattern(arm_vibes, 7);
   pulseVibeMotor();  // Ensure this is the active call
   return true;
@@ -1226,11 +1267,10 @@ void afterCruiseStart() {
   uint16_t initialCruisePWM = calculateCruisePwm(
       cruisedPotVal, deviceData.performance_mode, CRUISE_MAX_PERCENTAGE);
 
-  // Send the cruise PWM value to the throttle task via queue
-  if (xQueueSend(throttleUpdateQueue, &initialCruisePWM, pdMS_TO_TICKS(100)) !=
-      pdTRUE) {
-    USBSerial.println("Failed to queue initial cruise throttle PWM");
-  }
+  // Send the cruise PWM value to the throttle task via queue (non-blocking
+  // overwrite — blocking send inside changeDeviceState could trigger the
+  // xQueueGenericSend assert during cruise engagement).
+  xQueueOverwrite(throttleUpdateQueue, &initialCruisePWM);
 
   // pulseVibeMotor();
 }
@@ -1273,6 +1313,11 @@ void audioTask(void *parameter) {
           delayTicks = 1;
         }  // Ensure non-zero delay
         vTaskDelayUntil(&nextWakeTime, delayTicks);
+        // Add silence gap between notes for distinct separation
+        if (i < request.size - 1) {
+          stopTone();
+          vTaskDelayUntil(&nextWakeTime, pdMS_TO_TICKS(80));
+        }
       }
       stopTone();
     }
diff --git a/src/sp140/system_monitors.cpp b/src/sp140/system_monitors.cpp
index 014ec577..e4262053 100644
--- a/src/sp140/system_monitors.cpp
+++ b/src/sp140/system_monitors.cpp
@@ -46,19 +46,13 @@ void addAltimeterMonitors() {
     &multiLogger);
   monitors.push_back(bmpInitFailure);
 
-  // Barometer Temperature monitor disabled for now.
-  // TODO: The BMP barometer shares the I2C bus with other peripherals; without a
-  // global I2C mutex the `Wire` driver can log "Unfinished Repeated Start"
-  // errors when transactions from multiple tasks interleave.  Until we
-  // introduce a proper mutex (or move barometer access into a dedicated
-  // task), skip registering this monitor to avoid the noise and potential
-  // bus resets.
-  //
-  // static SensorMonitor* baroTemp = new SensorMonitor(
-  //   SensorID::Baro_Temp,
-  //   SensorCategory::ALTIMETER,
-  //   baroTempThresholds,
-  //   []() { return getBaroTemperature(); },
-  //   &multiLogger);
-  // monitors.push_back(baroTemp);
+  // Barometer Temperature — reads cached float (no I2C), safe from any task.
+  // Cache is populated by uiTask's getAltitude/getBaroTemperature calls.
+  static SensorMonitor* baroTemp = new SensorMonitor(
+    SensorID::Baro_Temp,
+    SensorCategory::ALTIMETER,
+    baroTempThresholds,
+    []() { return getCachedBaroTemperature(); },
+    &multiLogger);
+  monitors.push_back(baroTemp);
 }

From 3392c1855a7c364873ffe03c0b36c8a223630c17 Mon Sep 17 00:00:00 2001
From: Paul <36135447+PaulDWhite@users.noreply.github.com>
Date: Fri, 24 Apr 2026 17:26:14 -0400
Subject: [PATCH 6/6] BLE: fix Tmr Svc stack overflow + remove double-dialog SR
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Two BLE-pairing bugs surfaced while pairing an older Samsung phone.

1) Stack overflow in FreeRTOS Tmr Svc task.

   Reproduction: Samsung phone connects during pairing mode and
   immediately disconnects (HCI reason 0x13, "Remote User Terminated"),
   our onAdvertisingWatchdog timer fires ~580 ms later and calls
   startAdvertising(), which in turn runs NimBLE's advertising restart
   path. The timer callback runs in Tmr Svc, whose stack is sized by
   CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH. The 2 KB default was too
   tight for NimBLE's restart path — stack smashed mid-printf
   ("Advertising inactive..." printed as "Advertted..."), backtrace
   corrupted, device rebooted.

   Fix: bump CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH from 2048 to 4096
   in sdkconfig.defaults and sdkconfig.OpenPPG-CESP32S3-CAN-SP140.
   All three of our timer callbacks — onAdvertisingWatchdog,
   onPairingTimeout, applyPreferredLinkParams (gConnTuneTimer) — call
   into NimBLE, so they all benefit.

2) Double "Pair with …?" dialog on Samsung/Android.

   Reproduction: button-hold controller into pairing mode, scan and
   tap-to-pair from the phone. Phone shows one Pair dialog, user taps
   Pair, phone shows ANOTHER Pair dialog, user taps Pair again, pair
   finally completes.

   Root cause: onConnect() called ble_gap_security_initiate() the
   moment any non-encrypted link came up during pairing mode. That
   peripheral-initiated SMP Security Request makes Samsung's stack
   surface its own pair prompt — on top of the prompt already queued
   for the user-driven pair flow — giving two dialogs. The proactive
   SR was originally added to nudge iOS past stale-bond reconnects.

   Fix: remove the onConnect SR entirely. The central drives pairing
   on its own when it needs access to a secured characteristic, so no
   peripheral-side kickoff is required for a normal pair. The iOS
   stale-bond case remains covered by the existing recovery path in
   onAuthenticationComplete(): when auth completes with
   !isEncrypted && !isBonded during pairing mode, we deleteBond() the
   peer and call ble_gap_security_initiate() to re-pair cleanly. That
   recovery only fires after a failed auth, so Samsung never sees a
   spurious SR there.

Verified on-device:
 (a) Samsung fresh pair — ONE dialog (was two)
 (b) Samsung reconnect — silent, zero dialogs, stored LTK reused
 (c) Fresh pair with second phone — clean

Also adds a lightweight [BLE] MTU change log via NimBLEServerCallbacks::
onMTUChange for future triage visibility.
---
 sdkconfig.OpenPPG-CESP32S3-CAN-SP140 | 4042 +++++++++++++-------------
 sdkconfig.defaults                   |    3 +
 src/sp140/ble/ble_core.cpp           |   30 +-
 3 files changed, 2044 insertions(+), 2031 deletions(-)

diff --git a/sdkconfig.OpenPPG-CESP32S3-CAN-SP140 b/sdkconfig.OpenPPG-CESP32S3-CAN-SP140
index 41f3f1c0..9475eda9 100644
--- a/sdkconfig.OpenPPG-CESP32S3-CAN-SP140
+++ b/sdkconfig.OpenPPG-CESP32S3-CAN-SP140
@@ -1,2021 +1,2021 @@
-#
-# Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) Project Configuration
-#
-CONFIG_IDF_CMAKE=y
-CONFIG_IDF_TARGET_ARCH_XTENSA=y
-CONFIG_IDF_TARGET="esp32s3"
-CONFIG_IDF_TARGET_ESP32S3=y
-CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
-
-#
-# SDK tool configuration
-#
-CONFIG_SDK_TOOLPREFIX="xtensa-esp32s3-elf-"
-# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
-# end of SDK tool configuration
-
-#
-# Build type
-#
-CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
-# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
-CONFIG_APP_BUILD_GENERATE_BINARIES=y
-CONFIG_APP_BUILD_BOOTLOADER=y
-CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
-# end of Build type
-
-#
-# Application manager
-#
-CONFIG_APP_COMPILE_TIME_DATE=y
-# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
-# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
-# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
-CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
-# end of Application manager
-
-#
-# Bootloader config
-#
-CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
-# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=3
-
-#
-# Serial Flash Configurations
-#
-# CONFIG_BOOTLOADER_FLASH_DC_AWARE is not set
-CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
-# end of Serial Flash Configurations
-
-CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
-# CONFIG_BOOTLOADER_FACTORY_RESET is not set
-# CONFIG_BOOTLOADER_APP_TEST is not set
-CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
-CONFIG_BOOTLOADER_WDT_ENABLE=y
-# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
-CONFIG_BOOTLOADER_WDT_TIME_MS=9000
-# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
-CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
-# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
-# end of Bootloader config
-
-#
-# Security features
-#
-CONFIG_SECURE_BOOT_SUPPORTS_RSA=y
-CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y
-# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
-# CONFIG_SECURE_BOOT is not set
-# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
-# end of Security features
-
-#
-# Boot ROM Behavior
-#
-CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
-# CONFIG_BOOT_ROM_LOG_ALWAYS_OFF is not set
-# CONFIG_BOOT_ROM_LOG_ON_GPIO_HIGH is not set
-# CONFIG_BOOT_ROM_LOG_ON_GPIO_LOW is not set
-# end of Boot ROM Behavior
-
-#
-# Serial flasher config
-#
-CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
-# CONFIG_ESPTOOLPY_NO_STUB is not set
-# CONFIG_ESPTOOLPY_OCT_FLASH is not set
-CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
-# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
-CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
-CONFIG_ESPTOOLPY_FLASHMODE="dio"
-CONFIG_ESPTOOLPY_S3_STR=y
-# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
-# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ="80m"
-# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
-# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
-CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
-CONFIG_ESPTOOLPY_BEFORE_RESET=y
-# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
-CONFIG_ESPTOOLPY_BEFORE="default_reset"
-CONFIG_ESPTOOLPY_AFTER_RESET=y
-# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
-CONFIG_ESPTOOLPY_AFTER="hard_reset"
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
-CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
-CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
-# end of Serial flasher config
-
-#
-# Partition Table
-#
-# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
-# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
-# CONFIG_PARTITION_TABLE_TWO_OTA is not set
-CONFIG_PARTITION_TABLE_CUSTOM=y
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="default_8MB.csv"
-CONFIG_PARTITION_TABLE_FILENAME="default_8MB.csv"
-CONFIG_PARTITION_TABLE_OFFSET=0x8000
-CONFIG_PARTITION_TABLE_MD5=y
-# end of Partition Table
-
-#
-# Arduino Configuration
-#
-CONFIG_ARDUINO_VARIANT="esp32s3"
-CONFIG_ENABLE_ARDUINO_DEPENDS=y
-CONFIG_AUTOSTART_ARDUINO=y
-# CONFIG_ARDUINO_RUN_CORE0 is not set
-CONFIG_ARDUINO_RUN_CORE1=y
-# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
-CONFIG_ARDUINO_RUNNING_CORE=1
-CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
-# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
-CONFIG_ARDUINO_EVENT_RUN_CORE1=y
-# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
-CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
-# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE0 is not set
-# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE1 is not set
-CONFIG_ARDUINO_SERIAL_EVENT_RUN_NO_AFFINITY=y
-CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE=-1
-CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE=2048
-CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY=24
-CONFIG_ARDUINO_UDP_RUN_CORE0=y
-# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
-# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
-CONFIG_ARDUINO_UDP_RUNNING_CORE=0
-CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
-# CONFIG_ARDUINO_ISR_IRAM is not set
-# CONFIG_DISABLE_HAL_LOCKS is not set
-
-#
-# Debug Log Configuration
-#
-# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
-CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
-# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
-# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
-# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
-# CONFIG_ARDUHAL_LOG_COLORS is not set
-# CONFIG_ARDUHAL_ESP_LOG is not set
-# end of Debug Log Configuration
-
-CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
-# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
-# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
-# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
-# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
-CONFIG_ARDUHAL_PARTITION_SCHEME="default"
-# CONFIG_AUTOCONNECT_WIFI is not set
-# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
-# end of Arduino Configuration
-
-#
-# Compiler options
-#
-CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
-# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
-CONFIG_COMPILER_HIDE_PATHS_MACROS=y
-CONFIG_COMPILER_CXX_EXCEPTIONS=y
-CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
-# CONFIG_COMPILER_CXX_RTTI is not set
-CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
-# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
-# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
-# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
-# CONFIG_COMPILER_DUMP_RTL_FILES is not set
-# end of Compiler options
-
-#
-# Component config
-#
-
-#
-# Application Level Tracing
-#
-# CONFIG_APPTRACE_DEST_JTAG is not set
-CONFIG_APPTRACE_DEST_NONE=y
-CONFIG_APPTRACE_LOCK_ENABLE=y
-# end of Application Level Tracing
-
-#
-# ESP-ASIO
-#
-# CONFIG_ASIO_SSL_SUPPORT is not set
-# end of ESP-ASIO
-
-#
-# Bluetooth
-#
-CONFIG_BT_ENABLED=y
-CONFIG_BT_SOC_SUPPORT_5_0=y
-
-#
-# Bluetooth controller
-#
-CONFIG_BT_CTRL_MODE_EFF=1
-CONFIG_BT_CTRL_BLE_MAX_ACT=6
-CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=6
-CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
-CONFIG_BT_CTRL_PINNED_TO_CORE_0=y
-# CONFIG_BT_CTRL_PINNED_TO_CORE_1 is not set
-CONFIG_BT_CTRL_PINNED_TO_CORE=0
-CONFIG_BT_CTRL_HCI_MODE_VHCI=y
-# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
-CONFIG_BT_CTRL_HCI_TL=1
-CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
-CONFIG_BT_BLE_CCA_MODE_NONE=y
-# CONFIG_BT_BLE_CCA_MODE_HW is not set
-# CONFIG_BT_BLE_CCA_MODE_SW is not set
-CONFIG_BT_BLE_CCA_MODE=0
-CONFIG_BT_CTRL_HW_CCA_VAL=20
-CONFIG_BT_CTRL_HW_CCA_EFF=0
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
-# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
-CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
-# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
-CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9=y
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
-# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P21 is not set
-CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=11
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
-CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
-CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
-CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE=y
-# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA is not set
-# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE is not set
-CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
-CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
-CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD=0
-# CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN is not set
-# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
-CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
-
-#
-# MODEM SLEEP Options
-#
-# CONFIG_BT_CTRL_MODEM_SLEEP is not set
-# end of MODEM SLEEP Options
-
-CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
-CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
-CONFIG_BT_CTRL_HCI_TL_EFF=1
-# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
-# CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
-# CONFIG_BT_BLE_ADV_DATA_LENGTH_ZERO_AUX is not set
-# end of Bluetooth controller
-
-CONFIG_BT_BLUEDROID_ENABLED=y
-# CONFIG_BT_NIMBLE_ENABLED is not set
-# CONFIG_BT_CONTROLLER_ONLY is not set
-
-#
-# Bluedroid Options
-#
-CONFIG_BT_BTC_TASK_STACK_SIZE=3072
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0=y
-# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1 is not set
-CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
-CONFIG_BT_BTU_TASK_STACK_SIZE=4352
-# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
-CONFIG_BT_BLE_ENABLED=y
-CONFIG_BT_GATTS_ENABLE=y
-# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
-# CONFIG_BT_BLE_BLUFI_ENABLE is not set
-CONFIG_BT_GATT_MAX_SR_PROFILES=8
-CONFIG_BT_GATT_MAX_SR_ATTRIBUTES=100
-# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
-CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
-CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
-# CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED is not set
-# CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE is not set
-# CONFIG_BT_GATTS_APPEARANCE_WRITABLE is not set
-CONFIG_BT_GATTC_ENABLE=y
-CONFIG_BT_GATTC_MAX_CACHE_CHAR=40
-CONFIG_BT_GATTC_NOTIF_REG_MAX=5
-# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
-CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
-CONFIG_BT_BLE_SMP_ENABLE=y
-# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
-# CONFIG_BT_STACK_NO_LOG is not set
-
-#
-# BT DEBUG LOG LEVEL
-#
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_HCI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_HCI_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTM_TRACE_LEVEL=2
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_L2CAP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL=2
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_SDP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_SDP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_GAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_GAP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BNEP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_PAN_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_PAN_TRACE_LEVEL=2
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_A2D_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_A2D_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVDT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVCT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_AVRC_TRACE_LEVEL=2
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_MCA_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_MCA_TRACE_LEVEL=2
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_HID_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_HID_TRACE_LEVEL=2
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_APPL_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_APPL_TRACE_LEVEL=2
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_GATT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_GATT_TRACE_LEVEL=2
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_SMP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_SMP_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTIF_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BTC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BTC_TRACE_LEVEL=2
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_OSI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_OSI_TRACE_LEVEL=2
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_ERROR is not set
-CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING=y
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_API is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BT_LOG_BLUFI_TRACE_LEVEL=2
-# end of BT DEBUG LOG LEVEL
-
-CONFIG_BT_ACL_CONNECTIONS=4
-CONFIG_BT_MULTI_CONNECTION_ENBALE=y
-# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
-# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
-# CONFIG_BT_BLE_HOST_QUEUE_CONG_CHECK is not set
-CONFIG_BT_SMP_ENABLE=y
-CONFIG_BT_SMP_MAX_BONDS=15
-# CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
-CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
-CONFIG_BT_MAX_DEVICE_NAME_LEN=32
-CONFIG_BT_BLE_RPA_TIMEOUT=900
-CONFIG_BT_BLE_50_FEATURES_SUPPORTED=y
-# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
-# CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
-# end of Bluedroid Options
-# end of Bluetooth
-
-# CONFIG_BLE_MESH is not set
-
-#
-# CoAP Configuration
-#
-CONFIG_COAP_MBEDTLS_PSK=y
-# CONFIG_COAP_MBEDTLS_PKI is not set
-# CONFIG_COAP_MBEDTLS_DEBUG is not set
-CONFIG_COAP_LOG_DEFAULT_LEVEL=0
-# end of CoAP Configuration
-
-#
-# Driver configurations
-#
-
-#
-# ADC configuration
-#
-# CONFIG_ADC_FORCE_XPD_FSM is not set
-CONFIG_ADC_DISABLE_DAC=y
-# CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 is not set
-# end of ADC configuration
-
-#
-# MCPWM configuration
-#
-# CONFIG_MCPWM_ISR_IN_IRAM is not set
-# end of MCPWM configuration
-
-#
-# SPI configuration
-#
-# CONFIG_SPI_MASTER_IN_IRAM is not set
-CONFIG_SPI_MASTER_ISR_IN_IRAM=y
-# CONFIG_SPI_SLAVE_IN_IRAM is not set
-CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
-# end of SPI configuration
-
-#
-# TWAI configuration
-#
-# CONFIG_TWAI_ISR_IN_IRAM is not set
-# CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM is not set
-# end of TWAI configuration
-
-#
-# UART configuration
-#
-# CONFIG_UART_ISR_IN_IRAM is not set
-# end of UART configuration
-
-#
-# GDMA Configuration
-#
-# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_GDMA_ISR_IRAM_SAFE is not set
-# end of GDMA Configuration
-# end of Driver configurations
-
-#
-# eFuse Bit Manager
-#
-# CONFIG_EFUSE_CUSTOM_TABLE is not set
-# CONFIG_EFUSE_VIRTUAL is not set
-CONFIG_EFUSE_MAX_BLK_LEN=256
-# end of eFuse Bit Manager
-
-#
-# ESP-TLS
-#
-CONFIG_ESP_TLS_USING_MBEDTLS=y
-CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
-# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
-# CONFIG_ESP_TLS_SERVER is not set
-# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
-# CONFIG_ESP_TLS_INSECURE is not set
-# end of ESP-TLS
-
-#
-# ESP32S3-Specific
-#
-CONFIG_ESP32S3_REV_MIN_0=y
-# CONFIG_ESP32S3_REV_MIN_1 is not set
-# CONFIG_ESP32S3_REV_MIN_2 is not set
-CONFIG_ESP32S3_REV_MIN_FULL=0
-CONFIG_ESP_REV_MIN_FULL=0
-CONFIG_ESP32S3_REV_MAX_FULL_STR_OPT=y
-CONFIG_ESP32S3_REV_MAX_FULL=99
-CONFIG_ESP_REV_MAX_FULL=99
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_80 is not set
-# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160 is not set
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
-CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=240
-
-#
-# Cache config
-#
-CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
-CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
-CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
-# CONFIG_ESP32S3_INSTRUCTION_CACHE_WRAP is not set
-# CONFIG_ESP32S3_DATA_CACHE_16KB is not set
-CONFIG_ESP32S3_DATA_CACHE_32KB=y
-# CONFIG_ESP32S3_DATA_CACHE_64KB is not set
-CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
-# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set
-CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
-CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
-# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y
-# CONFIG_ESP32S3_DATA_CACHE_LINE_64B is not set
-CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=32
-# CONFIG_ESP32S3_DATA_CACHE_WRAP is not set
-# end of Cache config
-
-# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
-# CONFIG_ESP32S3_TRAX is not set
-CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ESP32S3_ULP_COPROC_ENABLED is not set
-CONFIG_ESP32S3_ULP_COPROC_RESERVE_MEM=0
-CONFIG_ESP32S3_DEBUG_OCDAWARE=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
-CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_1 is not set
-CONFIG_ESP32S3_BROWNOUT_DET_LVL=7
-CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1=y
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_FRC1 is not set
-# CONFIG_ESP32S3_TIME_SYSCALL_USE_NONE is not set
-CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC=y
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_ESP32S3_RTC_CLK_SRC_INT_8MD256 is not set
-CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES=1024
-CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY=2000
-# CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM is not set
-# CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE is not set
-# end of ESP32S3-Specific
-
-#
-# ADC-Calibration
-#
-# end of ADC-Calibration
-
-#
-# Common ESP-related
-#
-CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-# end of Common ESP-related
-
-#
-# Ethernet
-#
-CONFIG_ETH_ENABLED=y
-CONFIG_ETH_USE_SPI_ETHERNET=y
-# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
-# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
-# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
-# CONFIG_ETH_USE_OPENETH is not set
-# end of Ethernet
-
-#
-# Event Loop Library
-#
-# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
-CONFIG_ESP_EVENT_POST_FROM_ISR=y
-CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
-# end of Event Loop Library
-
-#
-# GDB Stub
-#
-# end of GDB Stub
-
-#
-# ESP HTTP client
-#
-CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
-# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
-CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
-# end of ESP HTTP client
-
-#
-# HTTP Server
-#
-CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
-CONFIG_HTTPD_MAX_URI_LEN=512
-CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
-CONFIG_HTTPD_PURGE_BUF_LEN=32
-# CONFIG_HTTPD_LOG_PURGE_DATA is not set
-# CONFIG_HTTPD_WS_SUPPORT is not set
-# end of HTTP Server
-
-#
-# ESP HTTPS OTA
-#
-# CONFIG_OTA_ALLOW_HTTP is not set
-# end of ESP HTTPS OTA
-
-#
-# ESP HTTPS server
-#
-# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
-# end of ESP HTTPS server
-
-#
-# Hardware Settings
-#
-
-#
-# MAC Config
-#
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
-# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4
-# end of MAC Config
-
-#
-# Sleep Config
-#
-# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set
-CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
-CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y
-CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
-CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU=y
-CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
-# end of Sleep Config
-
-#
-# RTC Clock Config
-#
-CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB=y
-# end of RTC Clock Config
-# end of Hardware Settings
-
-#
-# IPC (Inter-Processor Call)
-#
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_IPC_ISR_ENABLE=y
-# end of IPC (Inter-Processor Call)
-
-#
-# LCD and Touch Panel
-#
-
-#
-# LCD Touch Drivers are maintained in the IDF Component Registry
-#
-
-#
-# LCD Peripheral Configuration
-#
-CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
-# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
-# end of LCD Peripheral Configuration
-# end of LCD and Touch Panel
-
-#
-# ESP NETIF Adapter
-#
-CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
-CONFIG_ESP_NETIF_TCPIP_LWIP=y
-# CONFIG_ESP_NETIF_LOOPBACK is not set
-CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
-# end of ESP NETIF Adapter
-
-#
-# PHY
-#
-CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP_PHY_MAX_TX_POWER=20
-# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set
-CONFIG_ESP_PHY_ENABLE_USB=y
-CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
-# CONFIG_ESP_PHY_RF_CAL_NONE is not set
-# CONFIG_ESP_PHY_RF_CAL_FULL is not set
-CONFIG_ESP_PHY_CALIBRATION_MODE=0
-# end of PHY
-
-#
-# Power Management
-#
-# CONFIG_PM_ENABLE is not set
-CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
-CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP=y
-# end of Power Management
-
-#
-# ESP Ringbuf
-#
-# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
-# CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH is not set
-# end of ESP Ringbuf
-
-#
-# ESP System Settings
-#
-# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
-CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
-# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
-CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y
-CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
-
-#
-# Memory protection
-#
-# end of Memory protection
-
-CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
-CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
-# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
-# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
-CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
-CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_USB_CDC is not set
-# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set
-# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_NONE is not set
-# CONFIG_ESP_CONSOLE_SECONDARY_NONE is not set
-CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG=y
-CONFIG_ESP_CONSOLE_UART=y
-CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
-CONFIG_ESP_INT_WDT=y
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
-CONFIG_ESP_TASK_WDT=y
-# CONFIG_ESP_TASK_WDT_PANIC is not set
-CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
-# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
-CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
-CONFIG_ESP_SYSTEM_BBPLL_RECALIB=y
-# end of ESP System Settings
-
-#
-# High resolution timer (esp_timer)
-#
-# CONFIG_ESP_TIMER_PROFILING is not set
-CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
-CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
-CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
-# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
-CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
-# end of High resolution timer (esp_timer)
-
-#
-# Wi-Fi
-#
-CONFIG_ESP32_WIFI_ENABLED=y
-CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
-# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
-CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
-# CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
-CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
-CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF=5
-# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
-CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
-CONFIG_ESP32_WIFI_TX_BA_WIN=6
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-CONFIG_ESP32_WIFI_NVS_ENABLED=y
-CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
-CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
-CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
-CONFIG_ESP32_WIFI_IRAM_OPT=y
-CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
-CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
-# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
-# CONFIG_ESP_WIFI_FTM_ENABLE is not set
-# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
-# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set
-# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
-CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
-# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set
-CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7
-# end of Wi-Fi
-
-#
-# Core dump
-#
-# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
-# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
-CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
-# end of Core dump
-
-#
-# FAT Filesystem support
-#
-# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
-CONFIG_FATFS_CODEPAGE_437=y
-# CONFIG_FATFS_CODEPAGE_720 is not set
-# CONFIG_FATFS_CODEPAGE_737 is not set
-# CONFIG_FATFS_CODEPAGE_771 is not set
-# CONFIG_FATFS_CODEPAGE_775 is not set
-# CONFIG_FATFS_CODEPAGE_850 is not set
-# CONFIG_FATFS_CODEPAGE_852 is not set
-# CONFIG_FATFS_CODEPAGE_855 is not set
-# CONFIG_FATFS_CODEPAGE_857 is not set
-# CONFIG_FATFS_CODEPAGE_860 is not set
-# CONFIG_FATFS_CODEPAGE_861 is not set
-# CONFIG_FATFS_CODEPAGE_862 is not set
-# CONFIG_FATFS_CODEPAGE_863 is not set
-# CONFIG_FATFS_CODEPAGE_864 is not set
-# CONFIG_FATFS_CODEPAGE_865 is not set
-# CONFIG_FATFS_CODEPAGE_866 is not set
-# CONFIG_FATFS_CODEPAGE_869 is not set
-# CONFIG_FATFS_CODEPAGE_932 is not set
-# CONFIG_FATFS_CODEPAGE_936 is not set
-# CONFIG_FATFS_CODEPAGE_949 is not set
-# CONFIG_FATFS_CODEPAGE_950 is not set
-CONFIG_FATFS_CODEPAGE=437
-CONFIG_FATFS_LFN_NONE=y
-# CONFIG_FATFS_LFN_HEAP is not set
-# CONFIG_FATFS_LFN_STACK is not set
-CONFIG_FATFS_FS_LOCK=0
-CONFIG_FATFS_TIMEOUT_MS=10000
-CONFIG_FATFS_PER_FILE_CACHE=y
-# CONFIG_FATFS_USE_FASTSEEK is not set
-# end of FAT Filesystem support
-
-#
-# Modbus configuration
-#
-CONFIG_FMB_COMM_MODE_TCP_EN=y
-CONFIG_FMB_TCP_PORT_DEFAULT=502
-CONFIG_FMB_TCP_PORT_MAX_CONN=5
-CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
-CONFIG_FMB_COMM_MODE_RTU_EN=y
-CONFIG_FMB_COMM_MODE_ASCII_EN=y
-CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
-CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
-CONFIG_FMB_QUEUE_LENGTH=20
-CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
-CONFIG_FMB_SERIAL_BUF_SIZE=256
-CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
-CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
-CONFIG_FMB_PORT_TASK_PRIO=10
-# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
-# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
-CONFIG_FMB_PORT_TASK_AFFINITY=0x0
-CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
-CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
-CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
-CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
-CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
-CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
-# CONFIG_FMB_TIMER_PORT_ENABLED is not set
-# CONFIG_FMB_TIMER_USE_ISR_DISPATCH_METHOD is not set
-# end of Modbus configuration
-
-#
-# FreeRTOS
-#
-# CONFIG_FREERTOS_UNICORE is not set
-CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
-CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
-CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
-# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
-CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
-CONFIG_FREERTOS_HZ=1000
-CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
-CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
-# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
-CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
-CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
-CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
-# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
-# CONFIG_FREERTOS_ASSERT_DISABLE is not set
-CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
-CONFIG_FREERTOS_ISR_STACKSIZE=1536
-# CONFIG_FREERTOS_LEGACY_HOOKS is not set
-CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
-# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
-CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
-CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
-CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
-# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
-# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
-CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
-# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
-# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
-CONFIG_FREERTOS_DEBUG_OCDAWARE=y
-CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
-# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
-# end of FreeRTOS
-
-#
-# Hardware Abstraction Layer (HAL) and Low Level (LL)
-#
-CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
-# CONFIG_HAL_ASSERTION_DISABLE is not set
-# CONFIG_HAL_ASSERTION_SILIENT is not set
-# CONFIG_HAL_ASSERTION_ENABLE is not set
-CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
-
-#
-# Heap memory debugging
-#
-CONFIG_HEAP_POISONING_DISABLED=y
-# CONFIG_HEAP_POISONING_LIGHT is not set
-# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
-CONFIG_HEAP_TRACING_OFF=y
-# CONFIG_HEAP_TRACING_STANDALONE is not set
-# CONFIG_HEAP_TRACING_TOHOST is not set
-# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
-# end of Heap memory debugging
-
-#
-# jsmn
-#
-# CONFIG_JSMN_PARENT_LINKS is not set
-# CONFIG_JSMN_STRICT is not set
-# end of jsmn
-
-#
-# libsodium
-#
-# end of libsodium
-
-#
-# Log output
-#
-# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
-# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
-# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=1
-CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
-# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=1
-CONFIG_LOG_COLORS=y
-CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
-# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
-# end of Log output
-
-#
-# LWIP
-#
-CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
-# CONFIG_LWIP_NETIF_API is not set
-CONFIG_LWIP_TCPIP_TASK_PRIO=18
-# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
-# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set
-CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
-# CONFIG_LWIP_L2_TO_L3_COPY is not set
-# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
-CONFIG_LWIP_TIMERS_ONDEMAND=y
-CONFIG_LWIP_MAX_SOCKETS=10
-# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
-# CONFIG_LWIP_SO_LINGER is not set
-CONFIG_LWIP_SO_REUSE=y
-CONFIG_LWIP_SO_REUSE_RXTOALL=y
-CONFIG_LWIP_SO_RCVBUF=y
-# CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP_DEFAULT_TTL=64
-CONFIG_LWIP_IP4_FRAG=y
-CONFIG_LWIP_IP6_FRAG=y
-# CONFIG_LWIP_IP4_REASSEMBLY is not set
-# CONFIG_LWIP_IP6_REASSEMBLY is not set
-# CONFIG_LWIP_IP_FORWARD is not set
-# CONFIG_LWIP_STATS is not set
-# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
-CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
-CONFIG_LWIP_GARP_TMR_INTERVAL=60
-CONFIG_LWIP_ESP_MLDV6_REPORT=y
-CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
-CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
-CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
-# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
-CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
-# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
-CONFIG_LWIP_DHCP_OPTIONS_LEN=68
-CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1
-
-#
-# DHCP server
-#
-CONFIG_LWIP_DHCPS=y
-CONFIG_LWIP_DHCPS_LEASE_UNIT=60
-CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
-# end of DHCP server
-
-# CONFIG_LWIP_AUTOIP is not set
-CONFIG_LWIP_IPV6=y
-# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
-# CONFIG_LWIP_IPV6_FORWARD is not set
-# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
-CONFIG_LWIP_NETIF_LOOPBACK=y
-CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
-
-#
-# TCP
-#
-CONFIG_LWIP_MAX_ACTIVE_TCP=16
-CONFIG_LWIP_MAX_LISTENING_TCP=16
-CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
-CONFIG_LWIP_TCP_MAXRTX=12
-CONFIG_LWIP_TCP_SYNMAXRTX=12
-CONFIG_LWIP_TCP_MSS=1440
-CONFIG_LWIP_TCP_TMR_INTERVAL=250
-CONFIG_LWIP_TCP_MSL=60000
-CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000
-CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5760
-CONFIG_LWIP_TCP_WND_DEFAULT=5760
-CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
-CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
-CONFIG_LWIP_TCP_OOSEQ_TIMEOUT=6
-CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
-# CONFIG_LWIP_TCP_SACK_OUT is not set
-# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
-CONFIG_LWIP_TCP_OVERSIZE_MSS=y
-# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
-CONFIG_LWIP_TCP_RTO_TIME=1500
-# end of TCP
-
-#
-# UDP
-#
-CONFIG_LWIP_MAX_UDP_PCBS=16
-CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
-# end of UDP
-
-#
-# Checksums
-#
-# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
-# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
-CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
-# end of Checksums
-
-CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_LWIP_PPP_SUPPORT is not set
-CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
-CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
-# CONFIG_LWIP_SLIP_SUPPORT is not set
-
-#
-# ICMP
-#
-CONFIG_LWIP_ICMP=y
-# CONFIG_LWIP_MULTICAST_PING is not set
-# CONFIG_LWIP_BROADCAST_PING is not set
-# end of ICMP
-
-#
-# LWIP RAW API
-#
-CONFIG_LWIP_MAX_RAW_PCBS=16
-# end of LWIP RAW API
-
-#
-# SNTP
-#
-CONFIG_LWIP_SNTP_MAX_SERVERS=1
-# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
-CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
-# end of SNTP
-
-#
-# DNS
-#
-CONFIG_LWIP_DNS_MAX_SERVERS=3
-# CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
-# end of DNS
-
-CONFIG_LWIP_ESP_LWIP_ASSERT=y
-
-#
-# Hooks
-#
-# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
-CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
-# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
-CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
-# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
-CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
-# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
-# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
-CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
-# end of Hooks
-
-# CONFIG_LWIP_DEBUG is not set
-# end of LWIP
-
-#
-# mbedTLS
-#
-CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
-# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
-CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
-CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
-# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
-# CONFIG_MBEDTLS_DEBUG is not set
-
-#
-# mbedTLS v2.28.x related
-#
-# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
-CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT=y
-# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
-# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
-CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
-# end of mbedTLS v2.28.x related
-
-#
-# Certificate Bundle
-#
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
-# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
-# end of Certificate Bundle
-
-CONFIG_MBEDTLS_ECP_RESTARTABLE=y
-CONFIG_MBEDTLS_CMAC_C=y
-CONFIG_MBEDTLS_HARDWARE_AES=y
-CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
-CONFIG_MBEDTLS_HARDWARE_MPI=y
-CONFIG_MBEDTLS_HARDWARE_SHA=y
-CONFIG_MBEDTLS_ROM_MD5=y
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
-CONFIG_MBEDTLS_HAVE_TIME=y
-# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
-CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
-CONFIG_MBEDTLS_SHA512_C=y
-CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
-# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
-# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
-# CONFIG_MBEDTLS_TLS_DISABLED is not set
-CONFIG_MBEDTLS_TLS_SERVER=y
-CONFIG_MBEDTLS_TLS_CLIENT=y
-CONFIG_MBEDTLS_TLS_ENABLED=y
-
-#
-# TLS Key Exchange Methods
-#
-# CONFIG_MBEDTLS_PSK_MODES is not set
-CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
-# end of TLS Key Exchange Methods
-
-CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
-# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
-CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
-# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
-# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
-CONFIG_MBEDTLS_SSL_ALPN=y
-CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
-CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y
-CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y
-CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
-
-#
-# Symmetric Ciphers
-#
-CONFIG_MBEDTLS_AES_C=y
-# CONFIG_MBEDTLS_CAMELLIA_C is not set
-# CONFIG_MBEDTLS_DES_C is not set
-CONFIG_MBEDTLS_RC4_DISABLED=y
-# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
-# CONFIG_MBEDTLS_RC4_ENABLED is not set
-# CONFIG_MBEDTLS_BLOWFISH_C is not set
-# CONFIG_MBEDTLS_XTEA_C is not set
-CONFIG_MBEDTLS_CCM_C=y
-CONFIG_MBEDTLS_GCM_C=y
-# CONFIG_MBEDTLS_NIST_KW_C is not set
-# end of Symmetric Ciphers
-
-# CONFIG_MBEDTLS_RIPEMD160_C is not set
-
-#
-# Certificates
-#
-CONFIG_MBEDTLS_PEM_PARSE_C=y
-CONFIG_MBEDTLS_PEM_WRITE_C=y
-CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
-CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
-# end of Certificates
-
-CONFIG_MBEDTLS_ECP_C=y
-CONFIG_MBEDTLS_ECDH_C=y
-CONFIG_MBEDTLS_ECDSA_C=y
-# CONFIG_MBEDTLS_ECJPAKE_C is not set
-CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
-CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
-# CONFIG_MBEDTLS_POLY1305_C is not set
-# CONFIG_MBEDTLS_CHACHA20_C is not set
-# CONFIG_MBEDTLS_HKDF_C is not set
-# CONFIG_MBEDTLS_THREADING_C is not set
-# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
-# CONFIG_MBEDTLS_SECURITY_RISKS is not set
-# end of mbedTLS
-
-#
-# mDNS
-#
-CONFIG_MDNS_MAX_SERVICES=10
-CONFIG_MDNS_TASK_PRIORITY=1
-CONFIG_MDNS_TASK_STACK_SIZE=4096
-# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_MDNS_TASK_AFFINITY_CPU0=y
-# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
-CONFIG_MDNS_TASK_AFFINITY=0x0
-CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
-# CONFIG_MDNS_STRICT_MODE is not set
-CONFIG_MDNS_TIMER_PERIOD_MS=100
-# CONFIG_MDNS_NETWORKING_SOCKET is not set
-CONFIG_MDNS_MULTIPLE_INSTANCE=y
-# end of mDNS
-
-#
-# ESP-MQTT Configurations
-#
-CONFIG_MQTT_PROTOCOL_311=y
-CONFIG_MQTT_TRANSPORT_SSL=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
-# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
-# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
-# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
-# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
-# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
-# CONFIG_MQTT_CUSTOM_OUTBOX is not set
-# end of ESP-MQTT Configurations
-
-#
-# Newlib
-#
-CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
-CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
-# CONFIG_NEWLIB_NANO_FORMAT is not set
-# end of Newlib
-
-#
-# NVS
-#
-# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
-# end of NVS
-
-#
-# OpenSSL
-#
-# CONFIG_OPENSSL_DEBUG is not set
-CONFIG_OPENSSL_ERROR_STACK=y
-# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
-CONFIG_OPENSSL_ASSERT_EXIT=y
-# end of OpenSSL
-
-#
-# OpenThread
-#
-# CONFIG_OPENTHREAD_ENABLED is not set
-# end of OpenThread
-
-#
-# PThreads
-#
-CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_PTHREAD_STACK_MIN=768
-CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
-# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
-# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
-CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
-# end of PThreads
-
-#
-# Main Flash configuration
-#
-
-#
-# Optional and Experimental Features (READ DOCS FIRST)
-#
-
-#
-# Features here require specific hardware (READ DOCS FIRST!)
-#
-# CONFIG_SPI_FLASH_HPM_ENA is not set
-CONFIG_SPI_FLASH_HPM_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DIS is not set
-CONFIG_SPI_FLASH_HPM_ON=y
-CONFIG_SPI_FLASH_HPM_DC_AUTO=y
-# CONFIG_SPI_FLASH_HPM_DC_DISABLE is not set
-# end of Optional and Experimental Features (READ DOCS FIRST)
-# end of Main Flash configuration
-
-#
-# SPI Flash driver
-#
-# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
-# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
-CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
-# CONFIG_SPI_FLASH_ROM_IMPL is not set
-CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
-# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
-# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
-# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
-CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
-CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
-CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
-CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
-# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
-# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
-# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
-
-#
-# Auto-detect flash chips
-#
-CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y
-# end of Auto-detect flash chips
-
-CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
-# end of SPI Flash driver
-
-#
-# SPIFFS Configuration
-#
-CONFIG_SPIFFS_MAX_PARTITIONS=3
-
-#
-# SPIFFS Cache Configuration
-#
-CONFIG_SPIFFS_CACHE=y
-CONFIG_SPIFFS_CACHE_WR=y
-# CONFIG_SPIFFS_CACHE_STATS is not set
-# end of SPIFFS Cache Configuration
-
-CONFIG_SPIFFS_PAGE_CHECK=y
-CONFIG_SPIFFS_GC_MAX_RUNS=10
-# CONFIG_SPIFFS_GC_STATS is not set
-CONFIG_SPIFFS_PAGE_SIZE=256
-CONFIG_SPIFFS_OBJ_NAME_LEN=32
-# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
-CONFIG_SPIFFS_USE_MAGIC=y
-CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
-CONFIG_SPIFFS_META_LENGTH=4
-CONFIG_SPIFFS_USE_MTIME=y
-
-#
-# Debug Configuration
-#
-# CONFIG_SPIFFS_DBG is not set
-# CONFIG_SPIFFS_API_DBG is not set
-# CONFIG_SPIFFS_GC_DBG is not set
-# CONFIG_SPIFFS_CACHE_DBG is not set
-# CONFIG_SPIFFS_CHECK_DBG is not set
-# CONFIG_SPIFFS_TEST_VISUALISATION is not set
-# end of Debug Configuration
-# end of SPIFFS Configuration
-
-#
-# TCP Transport
-#
-
-#
-# Websocket
-#
-CONFIG_WS_TRANSPORT=y
-CONFIG_WS_BUFFER_SIZE=1024
-# end of Websocket
-# end of TCP Transport
-
-#
-# TinyUSB Stack
-#
-# CONFIG_TINYUSB is not set
-# end of TinyUSB Stack
-
-#
-# Unity unit testing library
-#
-CONFIG_UNITY_ENABLE_FLOAT=y
-CONFIG_UNITY_ENABLE_DOUBLE=y
-# CONFIG_UNITY_ENABLE_64BIT is not set
-# CONFIG_UNITY_ENABLE_COLOR is not set
-CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
-# CONFIG_UNITY_ENABLE_FIXTURE is not set
-# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
-# end of Unity unit testing library
-
-#
-# USB-OTG
-#
-CONFIG_USB_OTG_SUPPORTED=y
-CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=256
-CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_IN is not set
-# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
-
-#
-# Root Hub configuration
-#
-CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
-CONFIG_USB_HOST_RESET_HOLD_MS=30
-CONFIG_USB_HOST_RESET_RECOVERY_MS=30
-CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
-# end of Root Hub configuration
-# end of USB-OTG
-
-#
-# Virtual file system
-#
-CONFIG_VFS_SUPPORT_IO=y
-CONFIG_VFS_SUPPORT_DIR=y
-CONFIG_VFS_SUPPORT_SELECT=y
-CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_VFS_SUPPORT_TERMIOS=y
-
-#
-# Host File System I/O (Semihosting)
-#
-CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# end of Host File System I/O (Semihosting)
-# end of Virtual file system
-
-#
-# Wear Levelling
-#
-# CONFIG_WL_SECTOR_SIZE_512 is not set
-CONFIG_WL_SECTOR_SIZE_4096=y
-CONFIG_WL_SECTOR_SIZE=4096
-# end of Wear Levelling
-
-#
-# Wi-Fi Provisioning Manager
-#
-CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
-CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
-# CONFIG_WIFI_PROV_BLE_BONDING is not set
-# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
-# CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
-# end of Wi-Fi Provisioning Manager
-
-#
-# Supplicant
-#
-CONFIG_WPA_MBEDTLS_CRYPTO=y
-# CONFIG_WPA_WAPI_PSK is not set
-# CONFIG_WPA_SUITE_B_192 is not set
-# CONFIG_WPA_DEBUG_PRINT is not set
-# CONFIG_WPA_TESTING_OPTIONS is not set
-# CONFIG_WPA_WPS_STRICT is not set
-# CONFIG_WPA_11KV_SUPPORT is not set
-# CONFIG_WPA_MBO_SUPPORT is not set
-# CONFIG_WPA_DPP_SUPPORT is not set
-# end of Supplicant
-# end of Component config
-
-#
-# Compatibility options
-#
-# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
-# end of Compatibility options
-
-# Deprecated options for backward compatibility
-CONFIG_TOOLPREFIX="xtensa-esp32s3-elf-"
-# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
-# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=3
-# CONFIG_APP_ROLLBACK_ENABLE is not set
-# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-CONFIG_FLASHMODE_QIO=y
-# CONFIG_FLASHMODE_QOUT is not set
-# CONFIG_FLASHMODE_DIO is not set
-# CONFIG_FLASHMODE_DOUT is not set
-# CONFIG_MONITOR_BAUD_9600B is not set
-# CONFIG_MONITOR_BAUD_57600B is not set
-CONFIG_MONITOR_BAUD_115200B=y
-# CONFIG_MONITOR_BAUD_230400B is not set
-# CONFIG_MONITOR_BAUD_921600B is not set
-# CONFIG_MONITOR_BAUD_2MB is not set
-# CONFIG_MONITOR_BAUD_OTHER is not set
-CONFIG_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_MONITOR_BAUD=115200
-CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-CONFIG_CXX_EXCEPTIONS=y
-CONFIG_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
-CONFIG_STACK_CHECK_NONE=y
-# CONFIG_STACK_CHECK_NORM is not set
-# CONFIG_STACK_CHECK_STRONG is not set
-# CONFIG_STACK_CHECK_ALL is not set
-# CONFIG_WARN_WRITE_STRINGS is not set
-# CONFIG_DISABLE_GCC8_WARNINGS is not set
-# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
-CONFIG_ESP32_APPTRACE_DEST_NONE=y
-CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-CONFIG_BLUEDROID_ENABLED=y
-# CONFIG_NIMBLE_ENABLED is not set
-CONFIG_BTC_TASK_STACK_SIZE=3072
-CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
-# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
-CONFIG_BLUEDROID_PINNED_TO_CORE=0
-CONFIG_BTU_TASK_STACK_SIZE=4352
-# CONFIG_BLUEDROID_MEM_DEBUG is not set
-CONFIG_GATTS_ENABLE=y
-# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
-CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
-CONFIG_GATTC_ENABLE=y
-# CONFIG_GATTC_CACHE_NVS_FLASH is not set
-CONFIG_BLE_SMP_ENABLE=y
-# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
-# CONFIG_HCI_TRACE_LEVEL_NONE is not set
-# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
-CONFIG_HCI_TRACE_LEVEL_WARNING=y
-# CONFIG_HCI_TRACE_LEVEL_API is not set
-# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
-# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_HCI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTM_TRACE_LEVEL_NONE is not set
-# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
-CONFIG_BTM_TRACE_LEVEL_WARNING=y
-# CONFIG_BTM_TRACE_LEVEL_API is not set
-# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTM_INITIAL_TRACE_LEVEL=2
-# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
-# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
-CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
-# CONFIG_L2CAP_TRACE_LEVEL_API is not set
-# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
-# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
-CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
-# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
-# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
-CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
-# CONFIG_SDP_TRACE_LEVEL_NONE is not set
-# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
-CONFIG_SDP_TRACE_LEVEL_WARNING=y
-# CONFIG_SDP_TRACE_LEVEL_API is not set
-# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
-# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL=2
-# CONFIG_GAP_TRACE_LEVEL_NONE is not set
-# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
-CONFIG_GAP_TRACE_LEVEL_WARNING=y
-# CONFIG_GAP_TRACE_LEVEL_API is not set
-# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
-# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_GAP_INITIAL_TRACE_LEVEL=2
-CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
-# CONFIG_PAN_TRACE_LEVEL_NONE is not set
-# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
-CONFIG_PAN_TRACE_LEVEL_WARNING=y
-# CONFIG_PAN_TRACE_LEVEL_API is not set
-# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
-# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
-# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
-CONFIG_PAN_INITIAL_TRACE_LEVEL=2
-# CONFIG_A2D_TRACE_LEVEL_NONE is not set
-# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
-CONFIG_A2D_TRACE_LEVEL_WARNING=y
-# CONFIG_A2D_TRACE_LEVEL_API is not set
-# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
-# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
-# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
-CONFIG_A2D_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
-# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
-CONFIG_AVDT_TRACE_LEVEL_WARNING=y
-# CONFIG_AVDT_TRACE_LEVEL_API is not set
-# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
-# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
-CONFIG_AVCT_TRACE_LEVEL_WARNING=y
-# CONFIG_AVCT_TRACE_LEVEL_API is not set
-# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
-# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
-# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
-CONFIG_AVRC_TRACE_LEVEL_WARNING=y
-# CONFIG_AVRC_TRACE_LEVEL_API is not set
-# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
-# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
-# CONFIG_MCA_TRACE_LEVEL_NONE is not set
-# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
-CONFIG_MCA_TRACE_LEVEL_WARNING=y
-# CONFIG_MCA_TRACE_LEVEL_API is not set
-# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
-# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
-# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
-CONFIG_MCA_INITIAL_TRACE_LEVEL=2
-# CONFIG_HID_TRACE_LEVEL_NONE is not set
-# CONFIG_HID_TRACE_LEVEL_ERROR is not set
-CONFIG_HID_TRACE_LEVEL_WARNING=y
-# CONFIG_HID_TRACE_LEVEL_API is not set
-# CONFIG_HID_TRACE_LEVEL_EVENT is not set
-# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
-# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
-CONFIG_HID_INITIAL_TRACE_LEVEL=2
-# CONFIG_APPL_TRACE_LEVEL_NONE is not set
-# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
-CONFIG_APPL_TRACE_LEVEL_WARNING=y
-# CONFIG_APPL_TRACE_LEVEL_API is not set
-# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
-# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
-# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
-CONFIG_APPL_INITIAL_TRACE_LEVEL=2
-# CONFIG_GATT_TRACE_LEVEL_NONE is not set
-# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
-CONFIG_GATT_TRACE_LEVEL_WARNING=y
-# CONFIG_GATT_TRACE_LEVEL_API is not set
-# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
-# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
-# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
-CONFIG_GATT_INITIAL_TRACE_LEVEL=2
-# CONFIG_SMP_TRACE_LEVEL_NONE is not set
-# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
-CONFIG_SMP_TRACE_LEVEL_WARNING=y
-# CONFIG_SMP_TRACE_LEVEL_API is not set
-# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
-# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
-# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
-CONFIG_SMP_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
-# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
-CONFIG_BTIF_TRACE_LEVEL_WARNING=y
-# CONFIG_BTIF_TRACE_LEVEL_API is not set
-# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
-# CONFIG_BTC_TRACE_LEVEL_NONE is not set
-# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
-CONFIG_BTC_TRACE_LEVEL_WARNING=y
-# CONFIG_BTC_TRACE_LEVEL_API is not set
-# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
-# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BTC_INITIAL_TRACE_LEVEL=2
-# CONFIG_OSI_TRACE_LEVEL_NONE is not set
-# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
-CONFIG_OSI_TRACE_LEVEL_WARNING=y
-# CONFIG_OSI_TRACE_LEVEL_API is not set
-# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
-# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_OSI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
-# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
-CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
-# CONFIG_BLUFI_TRACE_LEVEL_API is not set
-# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
-# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
-# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
-CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
-# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
-CONFIG_SMP_ENABLE=y
-# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
-CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
-CONFIG_ADC2_DISABLE_DAC=y
-# CONFIG_EVENT_LOOP_PROFILING is not set
-CONFIG_POST_EVENTS_FROM_ISR=y
-CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
-# CONFIG_ESP_SYSTEM_PD_FLASH is not set
-CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
-CONFIG_IPC_TASK_STACK_SIZE=1536
-CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP32_PHY_MAX_TX_POWER=20
-# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
-CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
-# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
-CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
-CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y
-CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_MAIN_TASK_STACK_SIZE=3584
-CONFIG_CONSOLE_UART_DEFAULT=y
-# CONFIG_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART=y
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-CONFIG_INT_WDT=y
-CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
-CONFIG_TASK_WDT=y
-# CONFIG_TASK_WDT_PANIC is not set
-CONFIG_TASK_WDT_TIMEOUT_S=5
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_TIMER_TASK_STACK_SIZE=3584
-CONFIG_SW_COEXIST_ENABLE=y
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
-CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
-CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
-CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
-CONFIG_MB_QUEUE_LENGTH=20
-CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
-CONFIG_MB_SERIAL_BUF_SIZE=256
-CONFIG_MB_SERIAL_TASK_PRIO=10
-CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
-CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
-CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
-CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
-CONFIG_MB_CONTROLLER_STACK_SIZE=4096
-CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
-# CONFIG_MB_TIMER_PORT_ENABLED is not set
-# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-CONFIG_TIMER_TASK_PRIORITY=1
-CONFIG_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_TIMER_QUEUE_LENGTH=10
-# CONFIG_L2_TO_L3_COPY is not set
-# CONFIG_USE_ONLY_LWIP_SELECT is not set
-CONFIG_ESP_GRATUITOUS_ARP=y
-CONFIG_GARP_TMR_INTERVAL=60
-CONFIG_TCPIP_RECVMBOX_SIZE=32
-CONFIG_TCP_MAXRTX=12
-CONFIG_TCP_SYNMAXRTX=12
-CONFIG_TCP_MSS=1440
-CONFIG_TCP_MSL=60000
-CONFIG_TCP_SND_BUF_DEFAULT=5760
-CONFIG_TCP_WND_DEFAULT=5760
-CONFIG_TCP_RECVMBOX_SIZE=6
-CONFIG_TCP_QUEUE_OOSEQ=y
-# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
-CONFIG_TCP_OVERSIZE_MSS=y
-# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_TCP_OVERSIZE_DISABLE is not set
-CONFIG_UDP_RECVMBOX_SIZE=6
-CONFIG_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
-CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
-CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
-# CONFIG_USB_ENABLED is not set
-CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_SUPPORT_TERMIOS=y
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options
+#
+# Automatically generated file. DO NOT EDIT.
+# Espressif IoT Development Framework (ESP-IDF) Project Configuration
+#
+CONFIG_IDF_CMAKE=y
+CONFIG_IDF_TARGET_ARCH_XTENSA=y
+CONFIG_IDF_TARGET="esp32s3"
+CONFIG_IDF_TARGET_ESP32S3=y
+CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
+
+#
+# SDK tool configuration
+#
+CONFIG_SDK_TOOLPREFIX="xtensa-esp32s3-elf-"
+# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
+# end of SDK tool configuration
+
+#
+# Build type
+#
+CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
+# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
+CONFIG_APP_BUILD_GENERATE_BINARIES=y
+CONFIG_APP_BUILD_BOOTLOADER=y
+CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
+# end of Build type
+
+#
+# Application manager
+#
+CONFIG_APP_COMPILE_TIME_DATE=y
+# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
+# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
+# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
+CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
+# end of Application manager
+
+#
+# Bootloader config
+#
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
+# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
+# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
+# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
+# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
+# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
+CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
+# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
+# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
+CONFIG_BOOTLOADER_LOG_LEVEL=3
+
+#
+# Serial Flash Configurations
+#
+# CONFIG_BOOTLOADER_FLASH_DC_AWARE is not set
+CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
+# end of Serial Flash Configurations
+
+CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
+# CONFIG_BOOTLOADER_FACTORY_RESET is not set
+# CONFIG_BOOTLOADER_APP_TEST is not set
+CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
+CONFIG_BOOTLOADER_WDT_ENABLE=y
+# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
+CONFIG_BOOTLOADER_WDT_TIME_MS=9000
+# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
+# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
+# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
+# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
+CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
+# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
+# end of Bootloader config
+
+#
+# Security features
+#
+CONFIG_SECURE_BOOT_SUPPORTS_RSA=y
+CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y
+# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
+# CONFIG_SECURE_BOOT is not set
+# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
+# end of Security features
+
+#
+# Boot ROM Behavior
+#
+CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
+# CONFIG_BOOT_ROM_LOG_ALWAYS_OFF is not set
+# CONFIG_BOOT_ROM_LOG_ON_GPIO_HIGH is not set
+# CONFIG_BOOT_ROM_LOG_ON_GPIO_LOW is not set
+# end of Boot ROM Behavior
+
+#
+# Serial flasher config
+#
+CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
+# CONFIG_ESPTOOLPY_NO_STUB is not set
+# CONFIG_ESPTOOLPY_OCT_FLASH is not set
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
+# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
+# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
+CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
+CONFIG_ESPTOOLPY_FLASHMODE="dio"
+CONFIG_ESPTOOLPY_S3_STR=y
+# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
+CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
+# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
+CONFIG_ESPTOOLPY_FLASHFREQ="80m"
+# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
+CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
+CONFIG_ESPTOOLPY_BEFORE_RESET=y
+# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
+CONFIG_ESPTOOLPY_BEFORE="default_reset"
+CONFIG_ESPTOOLPY_AFTER_RESET=y
+# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
+CONFIG_ESPTOOLPY_AFTER="hard_reset"
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
+CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+# end of Serial flasher config
+
+#
+# Partition Table
+#
+# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
+# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
+# CONFIG_PARTITION_TABLE_TWO_OTA is not set
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="default_8MB.csv"
+CONFIG_PARTITION_TABLE_FILENAME="default_8MB.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+CONFIG_PARTITION_TABLE_MD5=y
+# end of Partition Table
+
+#
+# Arduino Configuration
+#
+CONFIG_ARDUINO_VARIANT="esp32s3"
+CONFIG_ENABLE_ARDUINO_DEPENDS=y
+CONFIG_AUTOSTART_ARDUINO=y
+# CONFIG_ARDUINO_RUN_CORE0 is not set
+CONFIG_ARDUINO_RUN_CORE1=y
+# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_RUNNING_CORE=1
+CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
+# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
+CONFIG_ARDUINO_EVENT_RUN_CORE1=y
+# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
+# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE0 is not set
+# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE1 is not set
+CONFIG_ARDUINO_SERIAL_EVENT_RUN_NO_AFFINITY=y
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE=-1
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE=2048
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY=24
+CONFIG_ARDUINO_UDP_RUN_CORE0=y
+# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
+# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_UDP_RUNNING_CORE=0
+CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
+# CONFIG_ARDUINO_ISR_IRAM is not set
+# CONFIG_DISABLE_HAL_LOCKS is not set
+
+#
+# Debug Log Configuration
+#
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
+CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
+CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
+# CONFIG_ARDUHAL_LOG_COLORS is not set
+# CONFIG_ARDUHAL_ESP_LOG is not set
+# end of Debug Log Configuration
+
+CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
+# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
+CONFIG_ARDUHAL_PARTITION_SCHEME="default"
+# CONFIG_AUTOCONNECT_WIFI is not set
+# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
+# end of Arduino Configuration
+
+#
+# Compiler options
+#
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
+# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
+# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
+# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
+# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
+CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
+# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
+CONFIG_COMPILER_HIDE_PATHS_MACROS=y
+CONFIG_COMPILER_CXX_EXCEPTIONS=y
+CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
+# CONFIG_COMPILER_CXX_RTTI is not set
+CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
+# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
+# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
+# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
+# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
+# CONFIG_COMPILER_DUMP_RTL_FILES is not set
+# end of Compiler options
+
+#
+# Component config
+#
+
+#
+# Application Level Tracing
+#
+# CONFIG_APPTRACE_DEST_JTAG is not set
+CONFIG_APPTRACE_DEST_NONE=y
+CONFIG_APPTRACE_LOCK_ENABLE=y
+# end of Application Level Tracing
+
+#
+# ESP-ASIO
+#
+# CONFIG_ASIO_SSL_SUPPORT is not set
+# end of ESP-ASIO
+
+#
+# Bluetooth
+#
+CONFIG_BT_ENABLED=y
+CONFIG_BT_SOC_SUPPORT_5_0=y
+
+#
+# Bluetooth controller
+#
+CONFIG_BT_CTRL_MODE_EFF=1
+CONFIG_BT_CTRL_BLE_MAX_ACT=6
+CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=6
+CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
+CONFIG_BT_CTRL_PINNED_TO_CORE_0=y
+# CONFIG_BT_CTRL_PINNED_TO_CORE_1 is not set
+CONFIG_BT_CTRL_PINNED_TO_CORE=0
+CONFIG_BT_CTRL_HCI_MODE_VHCI=y
+# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
+CONFIG_BT_CTRL_HCI_TL=1
+CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
+CONFIG_BT_BLE_CCA_MODE_NONE=y
+# CONFIG_BT_BLE_CCA_MODE_HW is not set
+# CONFIG_BT_BLE_CCA_MODE_SW is not set
+CONFIG_BT_BLE_CCA_MODE=0
+CONFIG_BT_CTRL_HW_CCA_VAL=20
+CONFIG_BT_CTRL_HW_CCA_EFF=0
+CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
+# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
+# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
+CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
+CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
+# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
+CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
+CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
+# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
+CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
+CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9=y
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P21 is not set
+CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=11
+CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
+CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
+CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
+CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
+CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE=y
+# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA is not set
+# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE is not set
+CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
+CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
+CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD=0
+# CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN is not set
+# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
+CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
+CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
+
+#
+# MODEM SLEEP Options
+#
+# CONFIG_BT_CTRL_MODEM_SLEEP is not set
+# end of MODEM SLEEP Options
+
+CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
+CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
+CONFIG_BT_CTRL_HCI_TL_EFF=1
+# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
+# CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
+# CONFIG_BT_BLE_ADV_DATA_LENGTH_ZERO_AUX is not set
+# end of Bluetooth controller
+
+CONFIG_BT_BLUEDROID_ENABLED=y
+# CONFIG_BT_NIMBLE_ENABLED is not set
+# CONFIG_BT_CONTROLLER_ONLY is not set
+
+#
+# Bluedroid Options
+#
+CONFIG_BT_BTC_TASK_STACK_SIZE=3072
+CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0=y
+# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1 is not set
+CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
+CONFIG_BT_BTU_TASK_STACK_SIZE=4352
+# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
+CONFIG_BT_BLE_ENABLED=y
+CONFIG_BT_GATTS_ENABLE=y
+# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
+# CONFIG_BT_BLE_BLUFI_ENABLE is not set
+CONFIG_BT_GATT_MAX_SR_PROFILES=8
+CONFIG_BT_GATT_MAX_SR_ATTRIBUTES=100
+# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
+# CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED is not set
+# CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE is not set
+# CONFIG_BT_GATTS_APPEARANCE_WRITABLE is not set
+CONFIG_BT_GATTC_ENABLE=y
+CONFIG_BT_GATTC_MAX_CACHE_CHAR=40
+CONFIG_BT_GATTC_NOTIF_REG_MAX=5
+# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
+CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
+CONFIG_BT_BLE_SMP_ENABLE=y
+# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
+# CONFIG_BT_STACK_NO_LOG is not set
+
+#
+# BT DEBUG LOG LEVEL
+#
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_HCI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_HCI_TRACE_LEVEL=2
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_BTM_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_BTM_TRACE_LEVEL=2
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_L2CAP_TRACE_LEVEL=2
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL=2
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_SDP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_SDP_TRACE_LEVEL=2
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_GAP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_GAP_TRACE_LEVEL=2
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_BNEP_TRACE_LEVEL=2
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_PAN_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_PAN_TRACE_LEVEL=2
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_A2D_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_A2D_TRACE_LEVEL=2
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_AVDT_TRACE_LEVEL=2
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_AVCT_TRACE_LEVEL=2
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_AVRC_TRACE_LEVEL=2
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_MCA_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_MCA_TRACE_LEVEL=2
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_HID_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_HID_TRACE_LEVEL=2
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_APPL_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_APPL_TRACE_LEVEL=2
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_GATT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_GATT_TRACE_LEVEL=2
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_SMP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_SMP_TRACE_LEVEL=2
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_BTIF_TRACE_LEVEL=2
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_BTC_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_BTC_TRACE_LEVEL=2
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_OSI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_OSI_TRACE_LEVEL=2
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE is not set
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_ERROR is not set
+CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING=y
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_API is not set
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_EVENT is not set
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BT_LOG_BLUFI_TRACE_LEVEL=2
+# end of BT DEBUG LOG LEVEL
+
+CONFIG_BT_ACL_CONNECTIONS=4
+CONFIG_BT_MULTI_CONNECTION_ENBALE=y
+# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
+# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
+# CONFIG_BT_BLE_HOST_QUEUE_CONG_CHECK is not set
+CONFIG_BT_SMP_ENABLE=y
+CONFIG_BT_SMP_MAX_BONDS=15
+# CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
+CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
+CONFIG_BT_MAX_DEVICE_NAME_LEN=32
+CONFIG_BT_BLE_RPA_TIMEOUT=900
+CONFIG_BT_BLE_50_FEATURES_SUPPORTED=y
+# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
+# CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
+# end of Bluedroid Options
+# end of Bluetooth
+
+# CONFIG_BLE_MESH is not set
+
+#
+# CoAP Configuration
+#
+CONFIG_COAP_MBEDTLS_PSK=y
+# CONFIG_COAP_MBEDTLS_PKI is not set
+# CONFIG_COAP_MBEDTLS_DEBUG is not set
+CONFIG_COAP_LOG_DEFAULT_LEVEL=0
+# end of CoAP Configuration
+
+#
+# Driver configurations
+#
+
+#
+# ADC configuration
+#
+# CONFIG_ADC_FORCE_XPD_FSM is not set
+CONFIG_ADC_DISABLE_DAC=y
+# CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 is not set
+# end of ADC configuration
+
+#
+# MCPWM configuration
+#
+# CONFIG_MCPWM_ISR_IN_IRAM is not set
+# end of MCPWM configuration
+
+#
+# SPI configuration
+#
+# CONFIG_SPI_MASTER_IN_IRAM is not set
+CONFIG_SPI_MASTER_ISR_IN_IRAM=y
+# CONFIG_SPI_SLAVE_IN_IRAM is not set
+CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
+# end of SPI configuration
+
+#
+# TWAI configuration
+#
+# CONFIG_TWAI_ISR_IN_IRAM is not set
+# CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM is not set
+# end of TWAI configuration
+
+#
+# UART configuration
+#
+# CONFIG_UART_ISR_IN_IRAM is not set
+# end of UART configuration
+
+#
+# GDMA Configuration
+#
+# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
+# CONFIG_GDMA_ISR_IRAM_SAFE is not set
+# end of GDMA Configuration
+# end of Driver configurations
+
+#
+# eFuse Bit Manager
+#
+# CONFIG_EFUSE_CUSTOM_TABLE is not set
+# CONFIG_EFUSE_VIRTUAL is not set
+CONFIG_EFUSE_MAX_BLK_LEN=256
+# end of eFuse Bit Manager
+
+#
+# ESP-TLS
+#
+CONFIG_ESP_TLS_USING_MBEDTLS=y
+CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
+# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
+# CONFIG_ESP_TLS_SERVER is not set
+# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
+# CONFIG_ESP_TLS_INSECURE is not set
+# end of ESP-TLS
+
+#
+# ESP32S3-Specific
+#
+CONFIG_ESP32S3_REV_MIN_0=y
+# CONFIG_ESP32S3_REV_MIN_1 is not set
+# CONFIG_ESP32S3_REV_MIN_2 is not set
+CONFIG_ESP32S3_REV_MIN_FULL=0
+CONFIG_ESP_REV_MIN_FULL=0
+CONFIG_ESP32S3_REV_MAX_FULL_STR_OPT=y
+CONFIG_ESP32S3_REV_MAX_FULL=99
+CONFIG_ESP_REV_MAX_FULL=99
+# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_80 is not set
+# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160 is not set
+CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
+CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=240
+
+#
+# Cache config
+#
+CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
+# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set
+CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
+# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set
+CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
+CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
+# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set
+CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
+CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
+# CONFIG_ESP32S3_INSTRUCTION_CACHE_WRAP is not set
+# CONFIG_ESP32S3_DATA_CACHE_16KB is not set
+CONFIG_ESP32S3_DATA_CACHE_32KB=y
+# CONFIG_ESP32S3_DATA_CACHE_64KB is not set
+CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
+# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set
+CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
+CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
+# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set
+CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y
+# CONFIG_ESP32S3_DATA_CACHE_LINE_64B is not set
+CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=32
+# CONFIG_ESP32S3_DATA_CACHE_WRAP is not set
+# end of Cache config
+
+# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
+# CONFIG_ESP32S3_TRAX is not set
+CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0
+# CONFIG_ESP32S3_ULP_COPROC_ENABLED is not set
+CONFIG_ESP32S3_ULP_COPROC_RESERVE_MEM=0
+CONFIG_ESP32S3_DEBUG_OCDAWARE=y
+CONFIG_ESP32S3_BROWNOUT_DET=y
+CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_6 is not set
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_5 is not set
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_4 is not set
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_3 is not set
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_2 is not set
+# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_1 is not set
+CONFIG_ESP32S3_BROWNOUT_DET_LVL=7
+CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1=y
+# CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC is not set
+# CONFIG_ESP32S3_TIME_SYSCALL_USE_FRC1 is not set
+# CONFIG_ESP32S3_TIME_SYSCALL_USE_NONE is not set
+CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC=y
+# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_CRYS is not set
+# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_OSC is not set
+# CONFIG_ESP32S3_RTC_CLK_SRC_INT_8MD256 is not set
+CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES=1024
+CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY=2000
+# CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM is not set
+# CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE is not set
+# end of ESP32S3-Specific
+
+#
+# ADC-Calibration
+#
+# end of ADC-Calibration
+
+#
+# Common ESP-related
+#
+CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
+# end of Common ESP-related
+
+#
+# Ethernet
+#
+CONFIG_ETH_ENABLED=y
+CONFIG_ETH_USE_SPI_ETHERNET=y
+# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
+# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
+# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
+# CONFIG_ETH_USE_OPENETH is not set
+# end of Ethernet
+
+#
+# Event Loop Library
+#
+# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
+CONFIG_ESP_EVENT_POST_FROM_ISR=y
+CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
+# end of Event Loop Library
+
+#
+# GDB Stub
+#
+# end of GDB Stub
+
+#
+# ESP HTTP client
+#
+CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
+# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
+CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
+# end of ESP HTTP client
+
+#
+# HTTP Server
+#
+CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
+CONFIG_HTTPD_MAX_URI_LEN=512
+CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
+CONFIG_HTTPD_PURGE_BUF_LEN=32
+# CONFIG_HTTPD_LOG_PURGE_DATA is not set
+# CONFIG_HTTPD_WS_SUPPORT is not set
+# end of HTTP Server
+
+#
+# ESP HTTPS OTA
+#
+# CONFIG_OTA_ALLOW_HTTP is not set
+# end of ESP HTTPS OTA
+
+#
+# ESP HTTPS server
+#
+# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
+# end of ESP HTTPS server
+
+#
+# Hardware Settings
+#
+
+#
+# MAC Config
+#
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
+# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
+CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
+CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4
+# end of MAC Config
+
+#
+# Sleep Config
+#
+# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set
+CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
+CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y
+CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
+CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU=y
+CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
+# end of Sleep Config
+
+#
+# RTC Clock Config
+#
+CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB=y
+# end of RTC Clock Config
+# end of Hardware Settings
+
+#
+# IPC (Inter-Processor Call)
+#
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
+CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
+CONFIG_ESP_IPC_ISR_ENABLE=y
+# end of IPC (Inter-Processor Call)
+
+#
+# LCD and Touch Panel
+#
+
+#
+# LCD Touch Drivers are maintained in the IDF Component Registry
+#
+
+#
+# LCD Peripheral Configuration
+#
+CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
+# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
+# end of LCD Peripheral Configuration
+# end of LCD and Touch Panel
+
+#
+# ESP NETIF Adapter
+#
+CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
+CONFIG_ESP_NETIF_TCPIP_LWIP=y
+# CONFIG_ESP_NETIF_LOOPBACK is not set
+CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
+# end of ESP NETIF Adapter
+
+#
+# PHY
+#
+CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
+# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
+CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
+CONFIG_ESP_PHY_MAX_TX_POWER=20
+# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set
+CONFIG_ESP_PHY_ENABLE_USB=y
+CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
+# CONFIG_ESP_PHY_RF_CAL_NONE is not set
+# CONFIG_ESP_PHY_RF_CAL_FULL is not set
+CONFIG_ESP_PHY_CALIBRATION_MODE=0
+# end of PHY
+
+#
+# Power Management
+#
+# CONFIG_PM_ENABLE is not set
+CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
+CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP=y
+# end of Power Management
+
+#
+# ESP Ringbuf
+#
+# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
+# CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH is not set
+# end of ESP Ringbuf
+
+#
+# ESP System Settings
+#
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
+CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
+# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
+CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y
+CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
+
+#
+# Memory protection
+#
+# end of Memory protection
+
+CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
+CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
+CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
+# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
+# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
+CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
+CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
+CONFIG_ESP_CONSOLE_UART_DEFAULT=y
+# CONFIG_ESP_CONSOLE_USB_CDC is not set
+# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set
+# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
+# CONFIG_ESP_CONSOLE_NONE is not set
+# CONFIG_ESP_CONSOLE_SECONDARY_NONE is not set
+CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG=y
+CONFIG_ESP_CONSOLE_UART=y
+CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
+CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+CONFIG_ESP_INT_WDT=y
+CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
+CONFIG_ESP_INT_WDT_CHECK_CPU1=y
+CONFIG_ESP_TASK_WDT=y
+# CONFIG_ESP_TASK_WDT_PANIC is not set
+CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
+# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
+# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
+CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
+CONFIG_ESP_SYSTEM_BBPLL_RECALIB=y
+# end of ESP System Settings
+
+#
+# High resolution timer (esp_timer)
+#
+# CONFIG_ESP_TIMER_PROFILING is not set
+CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
+CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
+CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
+CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
+# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
+CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
+# end of High resolution timer (esp_timer)
+
+#
+# Wi-Fi
+#
+CONFIG_ESP32_WIFI_ENABLED=y
+CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
+CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
+CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
+# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
+CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
+# CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
+CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
+CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF=5
+# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
+CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
+CONFIG_ESP32_WIFI_TX_BA_WIN=6
+CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
+CONFIG_ESP32_WIFI_RX_BA_WIN=6
+CONFIG_ESP32_WIFI_NVS_ENABLED=y
+CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
+# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
+CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
+CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
+CONFIG_ESP32_WIFI_IRAM_OPT=y
+CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
+CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
+# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
+# CONFIG_ESP_WIFI_FTM_ENABLE is not set
+# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
+# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set
+# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
+# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set
+CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7
+# end of Wi-Fi
+
+#
+# Core dump
+#
+# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
+# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
+CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
+# end of Core dump
+
+#
+# FAT Filesystem support
+#
+# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
+CONFIG_FATFS_CODEPAGE_437=y
+# CONFIG_FATFS_CODEPAGE_720 is not set
+# CONFIG_FATFS_CODEPAGE_737 is not set
+# CONFIG_FATFS_CODEPAGE_771 is not set
+# CONFIG_FATFS_CODEPAGE_775 is not set
+# CONFIG_FATFS_CODEPAGE_850 is not set
+# CONFIG_FATFS_CODEPAGE_852 is not set
+# CONFIG_FATFS_CODEPAGE_855 is not set
+# CONFIG_FATFS_CODEPAGE_857 is not set
+# CONFIG_FATFS_CODEPAGE_860 is not set
+# CONFIG_FATFS_CODEPAGE_861 is not set
+# CONFIG_FATFS_CODEPAGE_862 is not set
+# CONFIG_FATFS_CODEPAGE_863 is not set
+# CONFIG_FATFS_CODEPAGE_864 is not set
+# CONFIG_FATFS_CODEPAGE_865 is not set
+# CONFIG_FATFS_CODEPAGE_866 is not set
+# CONFIG_FATFS_CODEPAGE_869 is not set
+# CONFIG_FATFS_CODEPAGE_932 is not set
+# CONFIG_FATFS_CODEPAGE_936 is not set
+# CONFIG_FATFS_CODEPAGE_949 is not set
+# CONFIG_FATFS_CODEPAGE_950 is not set
+CONFIG_FATFS_CODEPAGE=437
+CONFIG_FATFS_LFN_NONE=y
+# CONFIG_FATFS_LFN_HEAP is not set
+# CONFIG_FATFS_LFN_STACK is not set
+CONFIG_FATFS_FS_LOCK=0
+CONFIG_FATFS_TIMEOUT_MS=10000
+CONFIG_FATFS_PER_FILE_CACHE=y
+# CONFIG_FATFS_USE_FASTSEEK is not set
+# end of FAT Filesystem support
+
+#
+# Modbus configuration
+#
+CONFIG_FMB_COMM_MODE_TCP_EN=y
+CONFIG_FMB_TCP_PORT_DEFAULT=502
+CONFIG_FMB_TCP_PORT_MAX_CONN=5
+CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
+CONFIG_FMB_COMM_MODE_RTU_EN=y
+CONFIG_FMB_COMM_MODE_ASCII_EN=y
+CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
+CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
+CONFIG_FMB_QUEUE_LENGTH=20
+CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
+CONFIG_FMB_SERIAL_BUF_SIZE=256
+CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
+CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
+CONFIG_FMB_PORT_TASK_PRIO=10
+# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
+CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
+# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
+CONFIG_FMB_PORT_TASK_AFFINITY=0x0
+CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
+CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
+CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
+CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
+CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
+CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
+# CONFIG_FMB_TIMER_PORT_ENABLED is not set
+# CONFIG_FMB_TIMER_USE_ISR_DISPATCH_METHOD is not set
+# end of Modbus configuration
+
+#
+# FreeRTOS
+#
+# CONFIG_FREERTOS_UNICORE is not set
+CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
+CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
+CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
+# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
+CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
+CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
+# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
+# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
+CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
+# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
+CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
+CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
+CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
+# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
+# CONFIG_FREERTOS_ASSERT_DISABLE is not set
+CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
+CONFIG_FREERTOS_ISR_STACKSIZE=1536
+# CONFIG_FREERTOS_LEGACY_HOOKS is not set
+CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
+CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
+# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
+CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
+CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=4096
+CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
+CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
+# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
+# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
+CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
+CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
+# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
+# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
+CONFIG_FREERTOS_DEBUG_OCDAWARE=y
+CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
+# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
+# end of FreeRTOS
+
+#
+# Hardware Abstraction Layer (HAL) and Low Level (LL)
+#
+CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
+# CONFIG_HAL_ASSERTION_DISABLE is not set
+# CONFIG_HAL_ASSERTION_SILIENT is not set
+# CONFIG_HAL_ASSERTION_ENABLE is not set
+CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
+# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
+
+#
+# Heap memory debugging
+#
+CONFIG_HEAP_POISONING_DISABLED=y
+# CONFIG_HEAP_POISONING_LIGHT is not set
+# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
+CONFIG_HEAP_TRACING_OFF=y
+# CONFIG_HEAP_TRACING_STANDALONE is not set
+# CONFIG_HEAP_TRACING_TOHOST is not set
+# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
+# end of Heap memory debugging
+
+#
+# jsmn
+#
+# CONFIG_JSMN_PARENT_LINKS is not set
+# CONFIG_JSMN_STRICT is not set
+# end of jsmn
+
+#
+# libsodium
+#
+# end of libsodium
+
+#
+# Log output
+#
+# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
+CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
+# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
+# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
+# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
+# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
+CONFIG_LOG_DEFAULT_LEVEL=1
+CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
+# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
+CONFIG_LOG_MAXIMUM_LEVEL=1
+CONFIG_LOG_COLORS=y
+CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
+# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
+# end of Log output
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
+# CONFIG_LWIP_NETIF_API is not set
+CONFIG_LWIP_TCPIP_TASK_PRIO=18
+# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
+# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set
+CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
+# CONFIG_LWIP_L2_TO_L3_COPY is not set
+# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
+CONFIG_LWIP_TIMERS_ONDEMAND=y
+CONFIG_LWIP_MAX_SOCKETS=10
+# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
+# CONFIG_LWIP_SO_LINGER is not set
+CONFIG_LWIP_SO_REUSE=y
+CONFIG_LWIP_SO_REUSE_RXTOALL=y
+CONFIG_LWIP_SO_RCVBUF=y
+# CONFIG_LWIP_NETBUF_RECVINFO is not set
+CONFIG_LWIP_IP_DEFAULT_TTL=64
+CONFIG_LWIP_IP4_FRAG=y
+CONFIG_LWIP_IP6_FRAG=y
+# CONFIG_LWIP_IP4_REASSEMBLY is not set
+# CONFIG_LWIP_IP6_REASSEMBLY is not set
+# CONFIG_LWIP_IP_FORWARD is not set
+# CONFIG_LWIP_STATS is not set
+# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
+CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
+CONFIG_LWIP_GARP_TMR_INTERVAL=60
+CONFIG_LWIP_ESP_MLDV6_REPORT=y
+CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
+CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
+CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
+# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
+CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
+# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
+CONFIG_LWIP_DHCP_OPTIONS_LEN=68
+CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1
+
+#
+# DHCP server
+#
+CONFIG_LWIP_DHCPS=y
+CONFIG_LWIP_DHCPS_LEASE_UNIT=60
+CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
+# end of DHCP server
+
+# CONFIG_LWIP_AUTOIP is not set
+CONFIG_LWIP_IPV6=y
+# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
+# CONFIG_LWIP_IPV6_FORWARD is not set
+# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
+CONFIG_LWIP_NETIF_LOOPBACK=y
+CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
+
+#
+# TCP
+#
+CONFIG_LWIP_MAX_ACTIVE_TCP=16
+CONFIG_LWIP_MAX_LISTENING_TCP=16
+CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
+CONFIG_LWIP_TCP_MAXRTX=12
+CONFIG_LWIP_TCP_SYNMAXRTX=12
+CONFIG_LWIP_TCP_MSS=1440
+CONFIG_LWIP_TCP_TMR_INTERVAL=250
+CONFIG_LWIP_TCP_MSL=60000
+CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000
+CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5760
+CONFIG_LWIP_TCP_WND_DEFAULT=5760
+CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
+CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
+CONFIG_LWIP_TCP_OOSEQ_TIMEOUT=6
+CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
+# CONFIG_LWIP_TCP_SACK_OUT is not set
+# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
+CONFIG_LWIP_TCP_OVERSIZE_MSS=y
+# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
+# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
+CONFIG_LWIP_TCP_RTO_TIME=1500
+# end of TCP
+
+#
+# UDP
+#
+CONFIG_LWIP_MAX_UDP_PCBS=16
+CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
+# end of UDP
+
+#
+# Checksums
+#
+# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
+# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
+CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
+# end of Checksums
+
+CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
+CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
+# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
+# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
+CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
+# CONFIG_LWIP_PPP_SUPPORT is not set
+CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
+CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
+# CONFIG_LWIP_SLIP_SUPPORT is not set
+
+#
+# ICMP
+#
+CONFIG_LWIP_ICMP=y
+# CONFIG_LWIP_MULTICAST_PING is not set
+# CONFIG_LWIP_BROADCAST_PING is not set
+# end of ICMP
+
+#
+# LWIP RAW API
+#
+CONFIG_LWIP_MAX_RAW_PCBS=16
+# end of LWIP RAW API
+
+#
+# SNTP
+#
+CONFIG_LWIP_SNTP_MAX_SERVERS=1
+# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
+CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
+# end of SNTP
+
+#
+# DNS
+#
+CONFIG_LWIP_DNS_MAX_SERVERS=3
+# CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
+# end of DNS
+
+CONFIG_LWIP_ESP_LWIP_ASSERT=y
+
+#
+# Hooks
+#
+# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
+CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
+# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
+CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
+# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
+# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
+CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
+# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
+# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
+CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
+# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
+# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
+# end of Hooks
+
+# CONFIG_LWIP_DEBUG is not set
+# end of LWIP
+
+#
+# mbedTLS
+#
+CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
+# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
+# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
+CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
+CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
+CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
+# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
+# CONFIG_MBEDTLS_DEBUG is not set
+
+#
+# mbedTLS v2.28.x related
+#
+# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
+CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT=y
+# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
+# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
+CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
+# end of mbedTLS v2.28.x related
+
+#
+# Certificate Bundle
+#
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
+# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
+# end of Certificate Bundle
+
+CONFIG_MBEDTLS_ECP_RESTARTABLE=y
+CONFIG_MBEDTLS_CMAC_C=y
+CONFIG_MBEDTLS_HARDWARE_AES=y
+CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
+CONFIG_MBEDTLS_HARDWARE_MPI=y
+CONFIG_MBEDTLS_HARDWARE_SHA=y
+CONFIG_MBEDTLS_ROM_MD5=y
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
+CONFIG_MBEDTLS_HAVE_TIME=y
+# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
+CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
+CONFIG_MBEDTLS_SHA512_C=y
+CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
+# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
+# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
+# CONFIG_MBEDTLS_TLS_DISABLED is not set
+CONFIG_MBEDTLS_TLS_SERVER=y
+CONFIG_MBEDTLS_TLS_CLIENT=y
+CONFIG_MBEDTLS_TLS_ENABLED=y
+
+#
+# TLS Key Exchange Methods
+#
+# CONFIG_MBEDTLS_PSK_MODES is not set
+CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
+# end of TLS Key Exchange Methods
+
+CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
+# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
+CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
+CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
+CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
+# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
+# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
+CONFIG_MBEDTLS_SSL_ALPN=y
+CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
+CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y
+CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y
+CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
+
+#
+# Symmetric Ciphers
+#
+CONFIG_MBEDTLS_AES_C=y
+# CONFIG_MBEDTLS_CAMELLIA_C is not set
+# CONFIG_MBEDTLS_DES_C is not set
+CONFIG_MBEDTLS_RC4_DISABLED=y
+# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
+# CONFIG_MBEDTLS_RC4_ENABLED is not set
+# CONFIG_MBEDTLS_BLOWFISH_C is not set
+# CONFIG_MBEDTLS_XTEA_C is not set
+CONFIG_MBEDTLS_CCM_C=y
+CONFIG_MBEDTLS_GCM_C=y
+# CONFIG_MBEDTLS_NIST_KW_C is not set
+# end of Symmetric Ciphers
+
+# CONFIG_MBEDTLS_RIPEMD160_C is not set
+
+#
+# Certificates
+#
+CONFIG_MBEDTLS_PEM_PARSE_C=y
+CONFIG_MBEDTLS_PEM_WRITE_C=y
+CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
+CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
+# end of Certificates
+
+CONFIG_MBEDTLS_ECP_C=y
+CONFIG_MBEDTLS_ECDH_C=y
+CONFIG_MBEDTLS_ECDSA_C=y
+# CONFIG_MBEDTLS_ECJPAKE_C is not set
+CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
+CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
+CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
+# CONFIG_MBEDTLS_POLY1305_C is not set
+# CONFIG_MBEDTLS_CHACHA20_C is not set
+# CONFIG_MBEDTLS_HKDF_C is not set
+# CONFIG_MBEDTLS_THREADING_C is not set
+# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
+# CONFIG_MBEDTLS_SECURITY_RISKS is not set
+# end of mbedTLS
+
+#
+# mDNS
+#
+CONFIG_MDNS_MAX_SERVICES=10
+CONFIG_MDNS_TASK_PRIORITY=1
+CONFIG_MDNS_TASK_STACK_SIZE=4096
+# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
+CONFIG_MDNS_TASK_AFFINITY_CPU0=y
+# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
+CONFIG_MDNS_TASK_AFFINITY=0x0
+CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
+# CONFIG_MDNS_STRICT_MODE is not set
+CONFIG_MDNS_TIMER_PERIOD_MS=100
+# CONFIG_MDNS_NETWORKING_SOCKET is not set
+CONFIG_MDNS_MULTIPLE_INSTANCE=y
+# end of mDNS
+
+#
+# ESP-MQTT Configurations
+#
+CONFIG_MQTT_PROTOCOL_311=y
+CONFIG_MQTT_TRANSPORT_SSL=y
+CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
+CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
+# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
+# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
+# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
+# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
+# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
+# CONFIG_MQTT_CUSTOM_OUTBOX is not set
+# end of ESP-MQTT Configurations
+
+#
+# Newlib
+#
+CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
+# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
+# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
+# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
+# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
+CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
+# CONFIG_NEWLIB_NANO_FORMAT is not set
+# end of Newlib
+
+#
+# NVS
+#
+# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
+# end of NVS
+
+#
+# OpenSSL
+#
+# CONFIG_OPENSSL_DEBUG is not set
+CONFIG_OPENSSL_ERROR_STACK=y
+# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
+CONFIG_OPENSSL_ASSERT_EXIT=y
+# end of OpenSSL
+
+#
+# OpenThread
+#
+# CONFIG_OPENTHREAD_ENABLED is not set
+# end of OpenThread
+
+#
+# PThreads
+#
+CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
+CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
+CONFIG_PTHREAD_STACK_MIN=768
+CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
+# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
+# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
+CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
+CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
+# end of PThreads
+
+#
+# Main Flash configuration
+#
+
+#
+# Optional and Experimental Features (READ DOCS FIRST)
+#
+
+#
+# Features here require specific hardware (READ DOCS FIRST!)
+#
+# CONFIG_SPI_FLASH_HPM_ENA is not set
+CONFIG_SPI_FLASH_HPM_AUTO=y
+# CONFIG_SPI_FLASH_HPM_DIS is not set
+CONFIG_SPI_FLASH_HPM_ON=y
+CONFIG_SPI_FLASH_HPM_DC_AUTO=y
+# CONFIG_SPI_FLASH_HPM_DC_DISABLE is not set
+# end of Optional and Experimental Features (READ DOCS FIRST)
+# end of Main Flash configuration
+
+#
+# SPI Flash driver
+#
+# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
+# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
+CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
+# CONFIG_SPI_FLASH_ROM_IMPL is not set
+CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
+# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
+# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
+# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
+# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
+# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
+CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
+CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
+CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
+CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
+# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
+# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
+# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
+
+#
+# Auto-detect flash chips
+#
+CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y
+# end of Auto-detect flash chips
+
+CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
+# end of SPI Flash driver
+
+#
+# SPIFFS Configuration
+#
+CONFIG_SPIFFS_MAX_PARTITIONS=3
+
+#
+# SPIFFS Cache Configuration
+#
+CONFIG_SPIFFS_CACHE=y
+CONFIG_SPIFFS_CACHE_WR=y
+# CONFIG_SPIFFS_CACHE_STATS is not set
+# end of SPIFFS Cache Configuration
+
+CONFIG_SPIFFS_PAGE_CHECK=y
+CONFIG_SPIFFS_GC_MAX_RUNS=10
+# CONFIG_SPIFFS_GC_STATS is not set
+CONFIG_SPIFFS_PAGE_SIZE=256
+CONFIG_SPIFFS_OBJ_NAME_LEN=32
+# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
+CONFIG_SPIFFS_USE_MAGIC=y
+CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
+CONFIG_SPIFFS_META_LENGTH=4
+CONFIG_SPIFFS_USE_MTIME=y
+
+#
+# Debug Configuration
+#
+# CONFIG_SPIFFS_DBG is not set
+# CONFIG_SPIFFS_API_DBG is not set
+# CONFIG_SPIFFS_GC_DBG is not set
+# CONFIG_SPIFFS_CACHE_DBG is not set
+# CONFIG_SPIFFS_CHECK_DBG is not set
+# CONFIG_SPIFFS_TEST_VISUALISATION is not set
+# end of Debug Configuration
+# end of SPIFFS Configuration
+
+#
+# TCP Transport
+#
+
+#
+# Websocket
+#
+CONFIG_WS_TRANSPORT=y
+CONFIG_WS_BUFFER_SIZE=1024
+# end of Websocket
+# end of TCP Transport
+
+#
+# TinyUSB Stack
+#
+# CONFIG_TINYUSB is not set
+# end of TinyUSB Stack
+
+#
+# Unity unit testing library
+#
+CONFIG_UNITY_ENABLE_FLOAT=y
+CONFIG_UNITY_ENABLE_DOUBLE=y
+# CONFIG_UNITY_ENABLE_64BIT is not set
+# CONFIG_UNITY_ENABLE_COLOR is not set
+CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
+# CONFIG_UNITY_ENABLE_FIXTURE is not set
+# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
+# end of Unity unit testing library
+
+#
+# USB-OTG
+#
+CONFIG_USB_OTG_SUPPORTED=y
+CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=256
+CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
+# CONFIG_USB_HOST_HW_BUFFER_BIAS_IN is not set
+# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
+
+#
+# Root Hub configuration
+#
+CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
+CONFIG_USB_HOST_RESET_HOLD_MS=30
+CONFIG_USB_HOST_RESET_RECOVERY_MS=30
+CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
+# end of Root Hub configuration
+# end of USB-OTG
+
+#
+# Virtual file system
+#
+CONFIG_VFS_SUPPORT_IO=y
+CONFIG_VFS_SUPPORT_DIR=y
+CONFIG_VFS_SUPPORT_SELECT=y
+CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
+CONFIG_VFS_SUPPORT_TERMIOS=y
+
+#
+# Host File System I/O (Semihosting)
+#
+CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+# end of Host File System I/O (Semihosting)
+# end of Virtual file system
+
+#
+# Wear Levelling
+#
+# CONFIG_WL_SECTOR_SIZE_512 is not set
+CONFIG_WL_SECTOR_SIZE_4096=y
+CONFIG_WL_SECTOR_SIZE=4096
+# end of Wear Levelling
+
+#
+# Wi-Fi Provisioning Manager
+#
+CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
+CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
+# CONFIG_WIFI_PROV_BLE_BONDING is not set
+# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
+# CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
+# end of Wi-Fi Provisioning Manager
+
+#
+# Supplicant
+#
+CONFIG_WPA_MBEDTLS_CRYPTO=y
+# CONFIG_WPA_WAPI_PSK is not set
+# CONFIG_WPA_SUITE_B_192 is not set
+# CONFIG_WPA_DEBUG_PRINT is not set
+# CONFIG_WPA_TESTING_OPTIONS is not set
+# CONFIG_WPA_WPS_STRICT is not set
+# CONFIG_WPA_11KV_SUPPORT is not set
+# CONFIG_WPA_MBO_SUPPORT is not set
+# CONFIG_WPA_DPP_SUPPORT is not set
+# end of Supplicant
+# end of Component config
+
+#
+# Compatibility options
+#
+# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
+# end of Compatibility options
+
+# Deprecated options for backward compatibility
+CONFIG_TOOLPREFIX="xtensa-esp32s3-elf-"
+# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
+CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
+# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
+CONFIG_LOG_BOOTLOADER_LEVEL=3
+# CONFIG_APP_ROLLBACK_ENABLE is not set
+# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
+CONFIG_FLASHMODE_QIO=y
+# CONFIG_FLASHMODE_QOUT is not set
+# CONFIG_FLASHMODE_DIO is not set
+# CONFIG_FLASHMODE_DOUT is not set
+# CONFIG_MONITOR_BAUD_9600B is not set
+# CONFIG_MONITOR_BAUD_57600B is not set
+CONFIG_MONITOR_BAUD_115200B=y
+# CONFIG_MONITOR_BAUD_230400B is not set
+# CONFIG_MONITOR_BAUD_921600B is not set
+# CONFIG_MONITOR_BAUD_2MB is not set
+# CONFIG_MONITOR_BAUD_OTHER is not set
+CONFIG_MONITOR_BAUD_OTHER_VAL=115200
+CONFIG_MONITOR_BAUD=115200
+CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
+# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
+CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
+# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
+# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
+CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
+CONFIG_CXX_EXCEPTIONS=y
+CONFIG_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
+CONFIG_STACK_CHECK_NONE=y
+# CONFIG_STACK_CHECK_NORM is not set
+# CONFIG_STACK_CHECK_STRONG is not set
+# CONFIG_STACK_CHECK_ALL is not set
+# CONFIG_WARN_WRITE_STRINGS is not set
+# CONFIG_DISABLE_GCC8_WARNINGS is not set
+# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
+CONFIG_ESP32_APPTRACE_DEST_NONE=y
+CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
+CONFIG_BLUEDROID_ENABLED=y
+# CONFIG_NIMBLE_ENABLED is not set
+CONFIG_BTC_TASK_STACK_SIZE=3072
+CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
+# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
+CONFIG_BLUEDROID_PINNED_TO_CORE=0
+CONFIG_BTU_TASK_STACK_SIZE=4352
+# CONFIG_BLUEDROID_MEM_DEBUG is not set
+CONFIG_GATTS_ENABLE=y
+# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
+CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
+CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
+CONFIG_GATTC_ENABLE=y
+# CONFIG_GATTC_CACHE_NVS_FLASH is not set
+CONFIG_BLE_SMP_ENABLE=y
+# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
+# CONFIG_HCI_TRACE_LEVEL_NONE is not set
+# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
+CONFIG_HCI_TRACE_LEVEL_WARNING=y
+# CONFIG_HCI_TRACE_LEVEL_API is not set
+# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
+# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_HCI_INITIAL_TRACE_LEVEL=2
+# CONFIG_BTM_TRACE_LEVEL_NONE is not set
+# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
+CONFIG_BTM_TRACE_LEVEL_WARNING=y
+# CONFIG_BTM_TRACE_LEVEL_API is not set
+# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
+# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BTM_INITIAL_TRACE_LEVEL=2
+# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
+# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
+CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
+# CONFIG_L2CAP_TRACE_LEVEL_API is not set
+# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
+# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
+# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
+# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
+CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
+# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
+# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
+# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
+# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
+CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
+# CONFIG_SDP_TRACE_LEVEL_NONE is not set
+# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
+CONFIG_SDP_TRACE_LEVEL_WARNING=y
+# CONFIG_SDP_TRACE_LEVEL_API is not set
+# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
+# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL=2
+# CONFIG_GAP_TRACE_LEVEL_NONE is not set
+# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
+CONFIG_GAP_TRACE_LEVEL_WARNING=y
+# CONFIG_GAP_TRACE_LEVEL_API is not set
+# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
+# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_GAP_INITIAL_TRACE_LEVEL=2
+CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
+# CONFIG_PAN_TRACE_LEVEL_NONE is not set
+# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
+CONFIG_PAN_TRACE_LEVEL_WARNING=y
+# CONFIG_PAN_TRACE_LEVEL_API is not set
+# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
+# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
+# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
+CONFIG_PAN_INITIAL_TRACE_LEVEL=2
+# CONFIG_A2D_TRACE_LEVEL_NONE is not set
+# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
+CONFIG_A2D_TRACE_LEVEL_WARNING=y
+# CONFIG_A2D_TRACE_LEVEL_API is not set
+# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
+# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
+# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
+CONFIG_A2D_INITIAL_TRACE_LEVEL=2
+# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
+# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
+CONFIG_AVDT_TRACE_LEVEL_WARNING=y
+# CONFIG_AVDT_TRACE_LEVEL_API is not set
+# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
+# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
+# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
+# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
+CONFIG_AVCT_TRACE_LEVEL_WARNING=y
+# CONFIG_AVCT_TRACE_LEVEL_API is not set
+# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
+# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
+# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
+# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
+CONFIG_AVRC_TRACE_LEVEL_WARNING=y
+# CONFIG_AVRC_TRACE_LEVEL_API is not set
+# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
+# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
+# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
+CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
+# CONFIG_MCA_TRACE_LEVEL_NONE is not set
+# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
+CONFIG_MCA_TRACE_LEVEL_WARNING=y
+# CONFIG_MCA_TRACE_LEVEL_API is not set
+# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
+# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
+# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
+CONFIG_MCA_INITIAL_TRACE_LEVEL=2
+# CONFIG_HID_TRACE_LEVEL_NONE is not set
+# CONFIG_HID_TRACE_LEVEL_ERROR is not set
+CONFIG_HID_TRACE_LEVEL_WARNING=y
+# CONFIG_HID_TRACE_LEVEL_API is not set
+# CONFIG_HID_TRACE_LEVEL_EVENT is not set
+# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
+# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
+CONFIG_HID_INITIAL_TRACE_LEVEL=2
+# CONFIG_APPL_TRACE_LEVEL_NONE is not set
+# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
+CONFIG_APPL_TRACE_LEVEL_WARNING=y
+# CONFIG_APPL_TRACE_LEVEL_API is not set
+# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
+# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
+# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
+CONFIG_APPL_INITIAL_TRACE_LEVEL=2
+# CONFIG_GATT_TRACE_LEVEL_NONE is not set
+# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
+CONFIG_GATT_TRACE_LEVEL_WARNING=y
+# CONFIG_GATT_TRACE_LEVEL_API is not set
+# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
+# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
+# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
+CONFIG_GATT_INITIAL_TRACE_LEVEL=2
+# CONFIG_SMP_TRACE_LEVEL_NONE is not set
+# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
+CONFIG_SMP_TRACE_LEVEL_WARNING=y
+# CONFIG_SMP_TRACE_LEVEL_API is not set
+# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
+# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
+# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
+CONFIG_SMP_INITIAL_TRACE_LEVEL=2
+# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
+# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
+CONFIG_BTIF_TRACE_LEVEL_WARNING=y
+# CONFIG_BTIF_TRACE_LEVEL_API is not set
+# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
+# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
+# CONFIG_BTC_TRACE_LEVEL_NONE is not set
+# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
+CONFIG_BTC_TRACE_LEVEL_WARNING=y
+# CONFIG_BTC_TRACE_LEVEL_API is not set
+# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
+# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BTC_INITIAL_TRACE_LEVEL=2
+# CONFIG_OSI_TRACE_LEVEL_NONE is not set
+# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
+CONFIG_OSI_TRACE_LEVEL_WARNING=y
+# CONFIG_OSI_TRACE_LEVEL_API is not set
+# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
+# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_OSI_INITIAL_TRACE_LEVEL=2
+# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
+# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
+CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
+# CONFIG_BLUFI_TRACE_LEVEL_API is not set
+# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
+# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
+# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
+CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
+# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
+CONFIG_SMP_ENABLE=y
+# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
+CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
+CONFIG_ADC2_DISABLE_DAC=y
+# CONFIG_EVENT_LOOP_PROFILING is not set
+CONFIG_POST_EVENTS_FROM_ISR=y
+CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
+# CONFIG_ESP_SYSTEM_PD_FLASH is not set
+CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
+CONFIG_IPC_TASK_STACK_SIZE=1536
+CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
+# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
+CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
+CONFIG_ESP32_PHY_MAX_TX_POWER=20
+# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
+CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
+# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
+CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
+CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y
+CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
+CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
+CONFIG_MAIN_TASK_STACK_SIZE=3584
+CONFIG_CONSOLE_UART_DEFAULT=y
+# CONFIG_CONSOLE_UART_CUSTOM is not set
+# CONFIG_ESP_CONSOLE_UART_NONE is not set
+CONFIG_CONSOLE_UART=y
+CONFIG_CONSOLE_UART_NUM=0
+CONFIG_CONSOLE_UART_BAUDRATE=115200
+CONFIG_INT_WDT=y
+CONFIG_INT_WDT_TIMEOUT_MS=300
+CONFIG_INT_WDT_CHECK_CPU1=y
+CONFIG_TASK_WDT=y
+# CONFIG_TASK_WDT_PANIC is not set
+CONFIG_TASK_WDT_TIMEOUT_S=5
+CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
+CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
+# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
+CONFIG_TIMER_TASK_STACK_SIZE=3584
+CONFIG_SW_COEXIST_ENABLE=y
+# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
+# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
+CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
+CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
+CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
+CONFIG_MB_QUEUE_LENGTH=20
+CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
+CONFIG_MB_SERIAL_BUF_SIZE=256
+CONFIG_MB_SERIAL_TASK_PRIO=10
+CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
+CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
+CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
+CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
+CONFIG_MB_CONTROLLER_STACK_SIZE=4096
+CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
+# CONFIG_MB_TIMER_PORT_ENABLED is not set
+# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
+CONFIG_TIMER_TASK_PRIORITY=1
+CONFIG_TIMER_TASK_STACK_DEPTH=4096
+CONFIG_TIMER_QUEUE_LENGTH=10
+# CONFIG_L2_TO_L3_COPY is not set
+# CONFIG_USE_ONLY_LWIP_SELECT is not set
+CONFIG_ESP_GRATUITOUS_ARP=y
+CONFIG_GARP_TMR_INTERVAL=60
+CONFIG_TCPIP_RECVMBOX_SIZE=32
+CONFIG_TCP_MAXRTX=12
+CONFIG_TCP_SYNMAXRTX=12
+CONFIG_TCP_MSS=1440
+CONFIG_TCP_MSL=60000
+CONFIG_TCP_SND_BUF_DEFAULT=5760
+CONFIG_TCP_WND_DEFAULT=5760
+CONFIG_TCP_RECVMBOX_SIZE=6
+CONFIG_TCP_QUEUE_OOSEQ=y
+# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
+CONFIG_TCP_OVERSIZE_MSS=y
+# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
+# CONFIG_TCP_OVERSIZE_DISABLE is not set
+CONFIG_UDP_RECVMBOX_SIZE=6
+CONFIG_TCPIP_TASK_STACK_SIZE=3072
+CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
+# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
+# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
+CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
+# CONFIG_PPP_SUPPORT is not set
+CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
+CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
+CONFIG_ESP32_PTHREAD_STACK_MIN=768
+CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
+# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
+# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
+CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
+CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
+CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
+# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
+# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
+# CONFIG_USB_ENABLED is not set
+CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
+CONFIG_SUPPORT_TERMIOS=y
+CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+# End of deprecated options
diff --git a/sdkconfig.defaults b/sdkconfig.defaults
index 331bc252..0c76292c 100644
--- a/sdkconfig.defaults
+++ b/sdkconfig.defaults
@@ -1,4 +1,7 @@
 CONFIG_FREERTOS_HZ=1000
+# Bump Tmr Svc task stack: BLE timer callbacks (advertising watchdog, pairing
+# timeout, conn-param tuner) call into NimBLE which can easily overrun 2 KB.
+CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=4096
 CONFIG_AUTOSTART_ARDUINO=y
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
diff --git a/src/sp140/ble/ble_core.cpp b/src/sp140/ble/ble_core.cpp
index 2a9345c6..a03b9928 100644
--- a/src/sp140/ble/ble_core.cpp
+++ b/src/sp140/ble/ble_core.cpp
@@ -244,13 +244,15 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
         connInfo.isBonded() ? 1 : 0, connInfo.isEncrypted() ? 1 : 0,
         pairingModeActive ? 1 : 0);
 
-    // During pairing mode, proactively request fresh security negotiation.
-    // This helps recover from stale iOS bonds where iOS tries to restore
-    // encryption with keys the controller no longer has (rc=19 failures).
-    if (pairingModeActive && !connInfo.isEncrypted()) {
-      USBSerial.println("[BLE] Pairing mode: requesting fresh security exchange");
-      ble_gap_security_initiate(connInfo.getConnHandle());
-    }
+    // Intentionally do NOT send a peripheral-initiated Security Request here.
+    // Previously this callback called ble_gap_security_initiate() whenever
+    // pairing mode was active and the link wasn't encrypted, to nudge iOS
+    // past stale-bond reconnects. On Samsung/Android that proactive SR
+    // causes a SPURIOUS second "Pair with …?" dialog (Android shows a prompt
+    // for our SR on top of the prompt for the user-driven pair flow). Letting
+    // the central drive pairing avoids the double dialog; the iOS stale-bond
+    // case is still handled by the recovery path in onAuthenticationComplete
+    // which deletes the stale bond and re-requests pairing after auth failure.
   }
 
   void onDisconnect(NimBLEServer *server, NimBLEConnInfo &connInfo,
@@ -294,9 +296,12 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
 
     if (!connInfo.isEncrypted() || !connInfo.isBonded()) {
       if (pairingModeActive) {
-        // During pairing mode, a failed auth likely means the phone has a stale
-        // bond (e.g. iOS cached old encryption keys).  Delete any peer data we
-        // have and request fresh pairing instead of rejecting outright.
+        // During pairing mode, a failed auth likely means the peer has a stale
+        // bond (e.g. iOS cached old encryption keys after we cleared ours).
+        // Delete any peer data we have and request fresh pairing instead of
+        // rejecting outright. This is the only place we still drive security
+        // from the peripheral side — it only runs after auth has already
+        // failed, so Samsung doesn't see a spurious SR here.
         const NimBLEAddress peerAddr = connInfo.getAddress();
         USBSerial.printf("[BLE] Pairing mode: auth failed for addr=%s id=%s, "
                          "requesting fresh pairing\n",
@@ -319,6 +324,11 @@ class BleServerConnectionCallbacks : public NimBLEServerCallbacks {
     USBSerial.printf("[BLE] Identity resolved addr=%s\n",
                      identityAddress.toString().c_str());
   }
+
+  void onMTUChange(uint16_t MTU, NimBLEConnInfo &connInfo) override {
+    USBSerial.printf("[BLE] MTU change mtu=%u handle=%u\n",
+                     MTU, connInfo.getConnHandle());
+  }
 };
 
 }  // namespace