I have just recently starting playing with check_pve and I love it.
Would it be possible to add a check for suggested ZFS pool upgrades?
Currently my proxmox show the following
URL: /api2/json/nodes/pve/disks/zfs/samsung-970-01
{"data":{"status":"Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable.","name":"samsung-970-01","children":[{"children":[{"read":0,"write":0,"cksum":0,"name":"/dev/disk/by-id/nvme-Samsung_SSD_970_EVO_Plus_2TB_serial#Z-part1","msg":"","state":"ONLINE","leaf":1}],"write":0,"read":0,"cksum":0,"name":"samsung-970-01","msg":"","state":"ONLINE","leaf":0}],"errors":"No known data errors","leaf":0,"scan":"scrub repaired 0B in 00:05:35 with 0 errors on Thu Feb 19 00:53:42 2026","state":"ONLINE","action":"Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details."}}
Thank you and regards,
Nikolay
I have just recently starting playing with check_pve and I love it.
Would it be possible to add a check for suggested ZFS pool upgrades?
Currently my proxmox show the following
URL: /api2/json/nodes/pve/disks/zfs/samsung-970-01
{"data":{"status":"Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable.","name":"samsung-970-01","children":[{"children":[{"read":0,"write":0,"cksum":0,"name":"/dev/disk/by-id/nvme-Samsung_SSD_970_EVO_Plus_2TB_serial#Z-part1","msg":"","state":"ONLINE","leaf":1}],"write":0,"read":0,"cksum":0,"name":"samsung-970-01","msg":"","state":"ONLINE","leaf":0}],"errors":"No known data errors","leaf":0,"scan":"scrub repaired 0B in 00:05:35 with 0 errors on Thu Feb 19 00:53:42 2026","state":"ONLINE","action":"Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details."}}Thank you and regards,
Nikolay